DT-8A air
The ICON DT-8A air Active Studio Monitor System provides a smooth and accurate response which makes the system pleasant to listen to. It is equipped with ICON's innovative "AirCon" wireless control module which enables you to have ultimate wireless control on your studio settings. Here are some of its main features:
Compact high performance active studio monitor
-> Active 2-Way Monitor System with complex Active Crossover design
-> The ideal solution for near-field monitoring in any recording or broadcasting facility
-> Designed for use in stereo as well as multichannel setups
-> Tuned by top-skilled acoustic engineer’s ear to fulfill any requirements in real recording studio environments
-> High, Mid and Low range contour control
-> High-Pass Filter – Flat, 60Hz & 80Hz selectable
-> Bi-Amped: 150W (LF), 80W(HF)
-> R-Type Transformer for super clean output
Mid/Woofer
-> ICON Custom designed 8" woofer
-> Nomex® reinforced paper cone for crisp, clean and very open reproduction
-> Low loss SBR surround with low creep and long time reliability
-> Progressive spider to achieve soft clipping and low distortion even under extreme load
-> Heavy dual
Magnet
ferrite
Magnet
system with extended height for superb bass reproduction
-> Aluminum short circuiting ring and cupper cap in
Magnet
system that practically eliminates motor distortion
-> Very rigid die-cast aluminum chassis with very open geometry for optimized air-flow to eliminate compression
Tweeter
-> High-end 1" dome tweeter
-> Soft fabric dome and surround with wide-dispersion optimized geometry
-> Big surround to reduce distortion
-> Low loss ferrofluid-free
Magnet
system for open and detailed sound
-> Heavy ferrite under hung dual
Magnet
system for high sensitivity and low distortion
-> Extended and air-flow optimized
Back
cavity to ensure low compression and low resonance frequency
-> Rugged die-cast aluminum faceplate with wide-dispersion optimized geometry
Cabinet
-> Robust and very rigid design
-> Diffraction optimized smooth front baffle design
-> Extended front baffle dimensions to eliminate any vibration or sound radiation from the enclosure
-> Premium absorbing material for long life high performance bass reproduction
AirCon™ Wireless Controller Module fully integrated
-> Remote controlled Volume and Mute
-> High, Mid and Low range contour control
-> High-Pass Filter – Flat, 60Hz & 80Hz selectable
- LCD Display (Graphic type)
DT-8A air
System -> Two-way active nearfield monitor
Frequency Response (+/-3dB) -> 35 Hz - 25 kHz
Max SPL 2 m, pair in listening room (IEC Short Term) -> 120 dB peak
Bass Principle -> Bass reflex
Tuning Frequency -> 40 Hz
Tweeter -> 1" wide dispersion soft dome
Woofer -> 8.0" Nomex paper cone
Magnet
ically shielded/compensated -> Shielded and Compensated
Cross over frequency -> 2.2 kHz
Cross over slope -> 24 dB/oct (LP and HP)
Input level for 100 dB SPL @ 500-2000 Hz avg @ 1 m -> 0 dBu RMS @ 0 dB level setting
Input connector -> Balanced XLR
LCD -> Graphic type, white
Back
lit
User settings (on the rear panel)
Power -> 2 pos switch (On/Off)
Input sensitivity -> 20 pos encoder (0 dB to mute)
High Pass Control -> Digital switch (Flat / 60 Hz / 80 Hz)
Bass control -> Digital switch (-2 dB / 0 dB / +2 dB)
Midrange control -> Digital switch (-2 dB / 0 dB / +2 dB)
Treble control -> Digital switch (-2 dB / 0 dB / +2 dB)
General
Power consumption -> Idle: 15W / Max: 230W
Amplifier power -> Tweeter: 80W / Woofer: 150W
Internal cabinet volume -> 14.5 liters
Weight -> 14.5 kg (31.9lbs)
Dimensions (WxHxD):
- 255 x 376 x 285 mm
- 10.1" x 14.8"x 11.3"
