Über eine Millionen Kunden vertrauen uns bereits!
115 Musiker sind für Sie da
Garantiert die besten Preise
400 000 vorrätige Artikel
Lieferung kostenlos ab 25€ Bestellwert
30 Tage Geld-zurück-Garantie
3 Jahre Mindest-Garantie
The Milan M15 is a portable 15" two-way powered loudspeaker featuring two independent input
channels, mic and line inputs, two band EQ, intelligent limiting, and a Mix Out function for
connection to additional Milan loudspeakers for easy system expansion.
The Class-D amplifier is a two channel unit with an integrated electronic crossover,
allowing the HF and LF drivers to be powered separately without one being able to
influence the sound of the other. Total output power is 1,100 watts peak, providing plenty
of headroom to maintain good dynamic range so that transient signals are delivered
effortlessly. The lightweight switch-mode power supply coupled with industry leading
Klark Teknik digital signal processing, providing dynamic equalisation and sophisticated
limiting functions to ensure optimum performance and long term reliability.
The two discrete input channels are each equipped with balanced, combination jack/XLR
connectors and a level control, catering for a range of music sources from low impedance
microphones, acoustic guitars and keyboards to mp3 players and mixing consoles,
selectable via a mic/line slide switch.
Common to both channels are bass and treble controls with ±6dB of cut or boost to allow
the loudspeaker to be equalised to the venue. In addition, a low cut filter is provided at
100Hz to shelve the low frequency response when used on the floor as a wedge monitor,
or to ensure correct integration with subwoofers. A speech/music switch optimises the
loudspeaker’s frequency response either for predominantly vocal material or for music
programme. A Mix Out function sends the mix of both input channels post-EQ to
additional Milan loudspeakers on a balanced male XLR for easy system expansion.
The trapezoidal enclosure is fabricated from high density polypropylene, and is
extensively ribbed externally and internally to eliminate resonances and also to provide
an attractive and durable cabinet finish. The symmetrical side angles allow the
loudspeaker to be conveniently used as a floor monitor. A recessed grab handle on the
top is designed for easy lifting and carrying, while the dual angle pole mount socket
allows the loudspeaker to be mounted on straight poles or speaker stands either
vertically, or raise higher and angled down to optimise audience coverage. A total of six
M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or
horizontal suspension in permanent installations using M10 shoulder eyebolts.
Mains power is connected via a non-locking IEC receptacle with integrated fuseholder. The
illuminated front badge can operate in one of three possible modes: permanently on;
permanently off; or to indicate the action of limiting.