Warenkorb

Ihr Warenkorb enthält 0 Artikel
Summe 0.00€
Zum Warenkorb

Land

France
France
België
België
Portugal
Portugal
Algérie
Algérie
United Kingdom
United Kingdom
Luxembourg
Luxembourg
Italia
Italia
Morocco
Morocco
Deutschland
Deutschland
Schweiz
Schweiz
Österreich
Österreich
Tunisia
Tunisia
Nederland
Nederland
España
España
United States
United States
Vorschläge fürloader
Top Marken :
    Kategorien :
      Alle Kategorien
        Alle Ergebnisse
        RUPERT NEVE DESIGNS 517
        Ref.: 170881
        Woodbrass Preis
        925.00€
        Lieferbar in 3-5 Tagen
        Online : sofortiger Versand
        Stores in Paris : auf Lager
        Versandkosten
        Versand kostenlos
        GARANTIE
        Garantie für diesen Artikel: 3 Jahre
        Meine Punkte
        925 Woodies: 9.25€ (+)
        Kaufen
        UVP
        1019.43€
        Sie sparen
        94.43€
        Beschreibung
        share
        Vertriebspartner der Marke
        rupert neve designs
        Beschreibung
        Based on the Portico 5017 Mobile Pre, the 517 provides world-class transformer-coupled micpreamp, compressor and DI circuitry with Vari-phase, “Silk” and DI/mic blending capabilities – all in a single 500 series module.

        Mic Pre and Instrument Amplifier
        The 517′s mic pre – based on the TEC Award-winning Portico 5017 – provides up to 66dB of gain, polarity-reverse and phantom power switches, and the “Silk” circuit for a more vintage vibe. The separate instrument amplifier includes 30dB of gain, a ground lift, variable phase and an instrument Thru connection.

        Blended Use
        Used as a single channel device for instruments, the 517 can be used to phase align, combine and compress direct and amplified signals. To achieve this, use the DI for the instrument’s direct signal and the mic preamp for the speaker cabinet signal. The blend control is used for mixing direct and amplified signals to achieve the desired tonal blend between the two sources, and the variphase is used to minimize or extenuate phase cancellations between the two signals. To compress the blended signal, the internal compressor jumper must be set to the blend path (this is the default setting). This technique could also be used to create a single, mixed output of a guitar and vocals.

        The Compressor
        Based around a new LDR (light dependent resister) design, the 517′s opto-coupler compressor has been simplified to a single threshold control with auto make up gain. By default, the compressor is set to a fixed 2:1 ratio with fixed attack and release. To set the compressor, simply dial the threshold control down until the desired amount of compression is achieved. An LED light indicates when the compressor is active.

        Vari-Phase
        In addition to the standard polarity reverse, the 517′s vari-phase control may be used to adjust phase incrementally. This control is useful any time two signals derived from the same source are combined.
        For instance, even with careful placement, the combination of close miced drums and overheads, can often yield hollow-sounding results. By using the variable phase adjust, the direct signal can be phase rotated until the signals are naturally aligned.
        This technique is also extremely useful when combined with the internal blend control on instruments. A bassist or guitarist using both direct and mic’d signals can blend the two into a single output, using the variable phase to reach an optimal alignment. By adjusting the phase in the 517, the musician or engineer can find the absolute best mic position without regard to the phase relation to the direct signal.


        SPECIFICATIONS

        - Frequency Response: Main Output, no load, –0.2 dB @ 10 Hz –3 dB @ 160 kHz
        - Noise: Measured at Main Output, unweighted, 22 Hz – 22 kHz, Terminated 150 Ohms. With gain at unity better than –100 dBu With gain at 66 dB better than –62 dBu Equivalent Input Noise better than –128 dBu Noise Factor 1.5dB
        - Maximum Output Level: Maximum output from 20 Hz to 40 kHz is +23 dBu.
        - Total Harmonic Distortion and Noise: @ 1 kHz, +20 dBu output: Main Output: Better than 0.001% @ 20 Hz, +20 dBu output: Main Output: Better than 0.002% Silk Engaged: Better than 0.2% Second harmonic
        - Crosstalk: Measured channel to channel: Better than –90 dB @ 15 kHz.
        - Phantom Power: +48 Volts DC ±1%

        Marken Referenznummer:517
        Vergleichbare Artikel
        Hier schlagen wir Ihnen vergleichbare Artikel aus derselben Preisklasse vor.
        Beratung rund um Ihre Bestellung
        Call Center
        dorothee_p - laura_h
        Kontaktieren Sie Dorothee : Gratis aus Deutschland 0800 664 6873
        International 0033 251 806 877
        Montag bis Freitag von 8 bis 19 Uhr.
        Samstags von 10 bis 18 Uhr.