Ihr Warenkorb enthält 0 Artikel
Summe 0.00€
Zum Warenkorb


United Kingdom
United Kingdom
United States
United States
Vorschläge fürloader
Top Marken :
    Kategorien :
      Alle Kategorien
        Alle Ergebnisse
        Ref.: 156033

        VOYAGER XL

        Woodbrass Preis
        Lieferbar in 3-5 Tagen
        Online : innerhalb 7-10 Tagen
        Stores in Paris : auf Bestellung
        Versandkosten kostenlos
        Garantie für diesen Artikel: 3 Jahre
        Sie sparen
        Vertriebspartner der Marke
        Moog Music is incredibly honored that The Minimoog Voyager XL was voted Best Keyboard/Synthesizer by the readers of Sound On Sound magazine.
        Incorporating virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, The Minimoog Voyager XL features extensive front-panel patchability that harkens back to the original ground-breaking Moog modular synthesizers. A host of features previously found only on massive modular synthesizers combined with state-of-the-art analog technology make it a sound design and control dream machine. Highlights include:
        61-Note Velocity Sensitive Keyboard with After-Pressure
        Ribbon Controller with Pitch and Gate CV Outputs
        Touch Surface Controller with X, Y, A and Gate Outputs
        External Audio Input
        Effects Loop Insert
        2 Active Attenuators
        4-Input CV Mixer
        Lag Processor
        Additional LFO Source with Multiple MIDI-Syncable Waveforms
        3 Four-Way Mults
        20 Control Voltage Outputs
        3 Gate Outputs
        10 Control Voltage Inputs
        4 Gate Inputs
        2 Modulation Busses
        Solid Maple Cabinet
        Tilting Control Panel

        100% Analog Sound Engine

        The MINIMOOG VOYAGER XL Synthesizer is a monophonic analog performance and production synthesizer. Based on the Minimoog Voyager sound engine, it incorporates virtually all of the sound resources and functions of the original Minimoog Model D and Voyager, with the addition of a number of exciting features from Moog's modular synthesizer legacy.


        61-Note Velocity Sensitive Keyboard with after-pressure. Identical to the Voyager 44-note keyboard.

        Ribbon Controller

        A 500mm Ribbon Controller is located on the middle wooden rail of the Voyager XL. It's center-point is lined up with 'middle-C' of the 61-note Keyboard. Outputs are sampled and available as CV-OUT (-5V to +5V) and GATE-OUT (0V to +5V).

        (20) Control Voltage output

        - Keyboard Pitch (w/ internal trim to calibrate to 1 V/Octave)
        - Keyboard Velocity
        - Keyboard Afterpressure
        - Touch Surface X
        - Touch Surface Y
        - Touch Surface A (area)
        - Pitch Bend Wheel
        - Mod Wheel
        - MOD 1 signal (signal at MOD 1 input)
        - MOD 2 signal (signal at MOD 2 input)
        - LFO triangle wave
        - LFO square wave
        - Mod Wheel Mod Buss output
        - Pedal/On Mod Buss output
        - Filter Envelope
        - Volume envelope
        - Sample and Hold Step
        - Sample and Hold Smooth
        - Noise
        - Ribbon Controller CV Output (-5V to +5V)

        (3) Gate outputs

        - Keyboard Gate
        - Touch Surface Gate
        - Ribbon Controller Gate Output

        (3) 4-way Mults (top jack is ring-powered)

        (10) Control Voltage Inputs

        - Envelope Rate CV (-5V to +5V) Ring-Powered
        - OSC Pitch CV (adj. to 1V/Octave) (-5V to +5V) Ring-Powered
        - OSC Wave CV (all three osc. affected) ( 0V to +5V) Ring-Powered
        - FILTER Cutoff CV (-5V to +5V) Ring-Powered
        - VCA Volume CV ( 0V to +5V) Ring-Powered
        - VCA Pan CV (-2.5V to +2.5V) Ring-Powered
        - LFO Rate CV (-5V to +5V) Ring-Powered
        - MOD Mod1 CV ( 0V to +5V) Ring-Powered
        - MOD Mod2 CV ( 0V to +5V) Ring-Powered
        - S&H CV (-5V to +5V) Ring-Powered

        (4) Gate Inputs

        - ENV Release ON/OFF (0V OFF, +5V ON)
        - ENV Gate Input (0V OFF, +5V ON)
        - LFO Sync ON/OFF (0V OFF, +5V ON)
        - S&H Gate Input (0V OFF, +5V ON) No footswitch input

        (2) Active Attenuators

        Active Attenuators are identical to the VX-352 attenuators with the following difference:

        CHANNEL 1 is normalled to LFO 2 output. So, if nothing is connected to the Channel 1 input jack, the output of Channel 1 will be the attenuated version of the LFO 2 output.

        CHANNEL 2 is normalled to RIBBON output. So, if nothing is connected to the Channel 2 input jack, the output of Channel 2 will be the attenuated version of the RIBBON controller.

        EXPRESSION PEDALS can be connected to the Attenuator inputs (i.e. they are ring-powered inputs).

        AMOUNT controls gain of -1 (CCW) to 1 (CW). Thus, the attenuators can create an inverted version of the waveform.

        OFFSET control allows you to add a DC voltage of -5V to +5V to the input signal. The Attenuator output will be clipped to approximately +/-10V.

        Four-Input Mixer

        - Inputs 1 and 2 can be attenuated via front-panel knobs
        - Inputs 1 and 3 can be controlled by Expression Pedals (i.e. ring-powered)
        - Two output CV's (+) and (-)
        - DC offset can be added to signal via OFFSET knob
        - Overall output of MIXER can be adjusted via the MASTER knob

        Lag Processor

        RISE and FALL time constants are adjustable from 1 millisecond to 1 second (middle is 100 millisecond).

        LFO 2

        A MIDI-syncable second LFO source has been added to the Voyager XL. The default frequency range is 0.02Hz (50 seconds) to 20Hz (0.05 seconds). This range was made to augment the current Voyager LFO which does not go slow-enough for some very slow modulations.

        INPUTS: LFO 2 can be

        - Free-running (adjusted by the RATE knob on the front panel)
        - MIDI SYNC from external MIDI clock
        - Directly CLOCKED from a GATE CV via the front panel CLOCK jack
        - Controlled via external CV or Expression Pedal via the front panel RATE CV jack

        OUTPUTS: LFO 2 has two complementary LFO outputs labeled (+) and (-). In default mode, these are the same waveform 180 degrees out of phase.


        Available front-panel waveforms:

        - TRIANGLE
        - SQUARE
        - RAMP
        - SAW
        - S&H
        - S&H SMOOTH


        Power input accepts a standard power cable. The Minimoog Voyager XL works from 100-250 VAC, 50-60 Hz.

        Marken Referenznummer:MOOG084
        Vergleichbare Artikel
        Hier schlagen wir Ihnen vergleichbare Artikel aus derselben Preisklasse vor.
        Beratung rund um Ihre Bestellung
        Call Center
        Kontaktieren Sie Dorothee : Gratis aus Deutschland 0800 664 6873
        International 0033 251 806 877
        Montag bis Freitag von 8 bis 19 Uhr.
        Samstags von 10 bis 18 Uhr.