The X-AMP is a true standard used in studios around the world. This active reamping box is able to simultaneously power two amplifiers, opening the door to many recording possibilities.
The professional healer.
The reamp boxes are legion, including Radial offers two passive versions to replay a prerecorded track through a guitar amplifier and effects. But unlike these passive re-amp systems, the X-Amp is equipped with buffers and amplifiers to control the signal, which tends to provide a more uniform sound when the gain level is lower. Coupled with a direct box such as the J48 to record, the X-Amp becomes the ultimate re-training tool for professionals.
Twice the power!
The X-Amp inherits the circuits of the famous Radial JD7 Injector by employing a unique Class A circuit, optimized to process the signals of a guitar. The main advantage of the X-Amp lies in its two separate outputs, which give the opportunity to simultaneously power two amplifiers with a single recording. The possibilities of sound experimentation offered by this particularity are immense and open the door to truly epic recordings.
Be the master of your recording.
Perfect for recording without stress, and without fatigue for musicians, the X-Amp provides sound engineers with a complete set of sound processing tools. In addition to the outputs provided, the X-Amp has a phase inverter acting on the output 2 to eliminate any phase problem during the recording of the two amplifiers. This tool is completed by the classic but nevertheless essential mass switch that neutralizes any ground loop. And of course, like all Radial products, the construction of the X-Amp is exemplary: a steel armored chassis, high-level connectors and a non-slip insulation pad. Radial, definitely!
Used by all professionals on the planet in the studio, the X-Amp is clearly the reamp housing you need if you seek to make a record with amazing results.
The X-Amp Radial is an active re-amper that allows you to replay the signal of a guitar recorded "dry" in an amp or chain of effects. Guitarists and sound engineers can experiment with different amps or effects chains long after the recording session.
The X-Amp uses an active Class A circuit to reproduce all the nuances of the original performance. The X-Amp sounds the amp as if the guitar was directly connected. The X-Amp accepts a +4dBu balanced input signal on the XLR connector and outputs 2 unbalanced instrument outputs to connect effects and / or amplifiers. In order to avoid ground loops between the recorder and the amps, the XLR input has a ground lift switch. The X-Amp allows the simultaneous use of 2 amps. The 2nd output amp is buffered to prevent signal loss, is isolated by a transformer to avoid the hums caused by the ground loops and has a polarity switch to align the phase of the amps between them . The Level Knob and Clip LED help adjust levels quickly and avoid round trips between the console and the amp.
The X-amp makes the process of reamping really easy, its audio quality more than excellent will give you excellent sound results. Coupled with a J48, you have in your hands the best re-amping kit in the world!
Outstanding features:
- 100% class A circuit
- Overload LED and level potentiometer for an easy setup
- 2 outputs, the second being buffered and isolated
Applications:
- Conversion from line level to instrument level
- Interface recording devices with amplifiers and effects pedals
- Re-amping
Category: reamp
Number of channels: 1
Lamps: no
Digital conversion: no
Frequency response: 20 Hz - 15 kHz
Signal-to-noise ratio: 88 dB at instr. (-20 dBu)
THD: 0.02%
Max input level (dBu): 22
Integrated preamp: no
Inputs: XLR
Outputs: 2 x jack
LED display
Settings: ground switch, phase inverter, output level
Power supply: DC 15 V
Dimensions (mm): 84 x 127 x 48
Weight (kg): 0.72
Brand reference number:
SRA X-AMP
en 
