Particularly useful for medium instruments such as guitars, vocals, harmonicas, and violins, the PULTEC medium frequency equalizer (type MEQ-5) shares the functions and characteristics of our 'EQP-1A' version. The differences come from the passive equalization section: In the MID EQ, the DIP and PEAK buttons provide a much more selective bell-shaped curve filter, giving the sound engineer more precise frequency control mediums and makes this processor an essential tool for Mastering engineers. The MID EQ also bridges the frequency gap between the low frequency and high frequency sections of our Enhanced Pultec EQP-1A equalizer; thus the combination of the two offers you a wide range of possibilities in sound recording or Mastering.
Spec. Techniques
- MANLEY input transformer with pure nickel core and enclosed in a mu-metal housing. Input impedance of 3 kOhms
- PHASE reverse button on the balanced XLR input
- Second high impedance input without transformer in 6.35 mm Jack (5 kOhms)
- BYPASS key and start-up delay by AUTO-MUTE
- Silent PEAK and SHELF settings
- Sealed Greyhill frequency switches with gold contacts
- High current output
- XLR outputs with transformer symmetry
- Flat frequency response from 10 Hz to 70 kHz
- DHT <0.01% at 1 kHz
- Signal-to-noise ratio: 116 dB
- FEEDBACK / GAIN adjustable: Unit ± 5 dB
- Max output level : +30 dBv
- Power consumption: 18 Watts
- Operating sector voltage: the processors are manufactured according to the country of destination: 100 Vac, 120 Vac, or 220-240 Vac, as indicated by the serial number. The power transformer must be replaced to modify the operating voltage. The 120 Vac processors CANNOT be rewired to operate on 220-240V by placing the power transformer primaries in series. A field of loud snoring then appears. If you change the line voltage, the supply transformer must be replaced by the one corresponding to the line voltage.
- Mains frequency: 50 ~ 60 Hz
- Dimensions: 483 mm (19 inches) x 44 mm x 254 mm (occupies 1 unit of height)
- Shipping weight: 5.4 kg
en 
