At-one UHF entry-level system, the best equipped on the market
AT-ONE, UHF Entry-end UHF system of audio-technica. With a 2 x 4 channel frequency plan for increased flexibility, a robust and elegant structure, and a simple user interface, the At-One is the wireless system that will accompany you everywhere.
This is the only wireless system in this price range, equipped with a transport case, a racking kit and offset antennas on BNC. In addition, the receiver delivers a voltage of 12V/100MA to allow you to add possible boosters, active splitters and antenna combine.
Designed for simple and easy use
Perfect balance between price and performance, the at-one is ideal for those looking for reliable results at low prices
The At-One frequency plan is divided into two groups with 4 channels available in each group, one in the authorized European frequency range and the other in the Duplex Gap
Users can choose up to 4 channels in a group
The ATW-11 system is equipped with a discreet and robust pocket transmitter
Emission power 10MW RF
The pocket transmitter has a 4-pin HRS connector, which can be plugged in all audio-technica wireless microphones
Autonomy of 10 hours with 2 1.5V AA batteries
RF light indicator
Robust and qualitative construction
Supplied in a transport case, with a rack mounting kit and detachable antennas
General system
Frequency bands: F -Band: 824 - 831 MHz, 863 - 865 MHz
Number of channels: 2 x 4 channels
Frequency stability: +/- 0.005%, controlled by phase locking
Modulation mode: FM
Frequency response: 60 Hz - 16 kHz
Operating range: 60m, typical
Receiver
Receiving system: diversity
Image rejection: minimum 55dB
Dynamic range: HH: 108 dB, BP 103 DB (in Deviation Max)
Total harmonic distortion: <1% (20 kHz deviation at 1 kHz)
Sensitivity: 10db μ V (S/N 60DB for deviation at 20 kHz)
Asymmetrical audio output: -2DBV
Symmetrical audio output: 4dBV
Output connector (microphone): symmetrical: male XLR
Output connector (instrument): asymmetrical: 6.3 mm Jack Mono
Maximum output level: MIC / Line (0 / -20DB)
Antenna input: BNC type, 50 - Bias voltage 12V DC 100ma each
Dimensions: 200 mm x 42 mm x 122 mm (W x h x D)
Weight: 418 g without accessories
Accessories provided: AC adapter, antennas, adapters for rack mounting
Pocket transmitter
Output power: 10 MW
Parasitic emissions: according to local regulations
Input connectors: pin 1: GND
Pin 2: INST
Pin 3: Mic
Pin 4: DC Bias +10V
Battery type: 2 x alkaline batteries 1.5V AA
Battery life:> 10 hours - depending on the type of battery and the methods of use
Dimensions: 66 mm x 98 mm x 22 mm (W x h x D)
Brand reference number:
ATW-1102
en 
