ra noise. The microphone includes a permanently attached cable with a 3.5 mm (1/8") L-type stereo plug output. A clip on the shoe mount holds the cable, relieving tension and preventing vibration noise.
A windscreen and fuzzy windscreen are also included.
Features
- Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone
- Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
- Three-position adjustable input pad and switchable low-frequency roll-off
- Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
- Compact, lightweight design with integral shoe mount
Specifications
- Elements: Fixed-charge back plate, permanently polarized condenser
- Polar patterns: Line-cardioid, LR stereo
- Frequency response: 40-15,000 Hz
- Low frequency roll-off: 80 Hz, 12 dB/octave
- Open circuit sensitivity –37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo)
- Impedance: 50 ohms
- Maximum input sound level: 128 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic range (typical): Mono: 106 dB, 1 kHz at Max SPL; Stereo: 104 dB, 1 kHz at Max SPL
- Signal-to-noise ratio1: Mono: 72 dB, 1 kHz at 1 Pa; Stereo: 70 dB, 1 kHz at 1 Pa
- Battery (included): Type: One 1.5V AA; Life: 80 hours typical
- Switches: Mono, M-S Stereo; Three-position input pad; Flat, roll-off
- Weight: 114 g (4.0 oz)
- Dimensions: 172.0 mm (6.77") long, 24.0 mm (0.94") maximum body diameter
- Output connector: 3.5 mm stereo mini-plug on cable
- Cable: Permanently attached 0.2 m -1 m (7.8"- 39.3") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
- Accessories furnished: Windscreen; Fuzzy windscreen; AA battery
Brand reference number:
AT8024
en 
