- Miniature condenser clip-on microphone for wind instruments, drums, and percussions
- Miniature gooseneck for accurate microphone alignment
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Transducer shock mount for high mechanical-noise rejection
The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.
The C 519 M features an integrated, switchable bass cut for adjusting the microphone’s frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.
Versions:
C 519 M for external phantom powering
C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
Polar pattern cardioid
Frequency range 60 Hz to 20 kHz
Sensitivity 5 mV/Pa (-46 dBV)
Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
Equivalent noise level 31 dB(A)
Signal/noise ratio (A-weighted) 63 dB
Impedance <= 200 ohms
Recommended load impedance >= 2000 ohms
Powering <= 2 mA
Power requirement B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
Connector 3-pin mini XLR
Cable 1.5 m (5 ft.)
Finish matte black
Dimensions Length: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
Net weight C 519 M: 195 g (6.9 oz.)
C 519 ML: 85 g (3 oz.) (microphone and cable)
Shipping weight C 519 M: 430 g (15.2 oz.)
C 519 ML: 310 g (11 oz.)
Brand reference number:
C519M
