The Focal Shape Twin speaker is the standard bearer of the Shape series and is characterized by excellent readability over the entire audio spectrum, combined with an extended frequency response in the bass and a high SPL capacity in relation to its size. . Its compact design greatly facilitates its integration, even in the most confined spaces.
Finally, its design offers a decisive advantage in controlling the low and low midrange registers, which are always critical to control in a small space. It will express its full potential from a listening distance of 1 m.
Features:
- Frequency response (+/- 3 dB): 40 Hz to 35 kHz
- Maximum sound pressure level (music): 110.5 dB SPL (peak at 1 m)
- Electronic inputs / impedance: balanced XLR, 10 kOhm
- RCA connectors: unbalanced, 10 kOhm with input sensitivity compensation
- High-end midrange and bass amplifier: 80 Watt, class AB
- High-end treble amplifier: 50 Watt, class AB
- Automatic standby mode
- Stop: after approximately 30 minutes without input signal
- End of standby mode: applied signal level> 3 mV
- Supply voltage: 220 to 240 V (fuse: T2AL / 250 V) or 100 to 120 V (fuse T3.15AL / 250 V)
- Connections: IEC socket and separate power cord
- High pass filter: variable, range 45/60/90 Hz
- Bass level (0 - 250 Hz): variable, +/- 6 dB
- Mid / low (160 Hz, Q = 1): variable, +/- 3 dB
- Treble level (4.5 - 35 kHz): variable, +/- 3 dB
- Switch: Switch on / off at the rear
- Consumption in standby mode: <0.5 Watt
- Status LED for power on / off and standby
- Speaker: 2 x 5 "(13 cm) in linen cone
- Tweeter: 1 "(25 mm) aluminum / magnesium with M profile
- Housing construction: 15 mm plywood
- Finish: vinyl, walnut veneer, black lacquer
- Dimensions (H x W x D): 478 x 211 x 279 mm
- Weight: 11 kg
Brand reference number:
SHAPE TWIN
en 
