The XS400 is a power amplifier working in class D with a power of 200 W per channel on 4 ohms, 400 W on 8 ohms in bridged mode. His response curve covers 20 Hz to 20 kHz.
Characteristics
- output power (1 kHz, on 4 ohms): 2 x 200 W
- output power (1 kHz, on 8 ohms): 2 x 100 W
- output power (1 kHz, on 8 ohms, bridge mode): 400 W
- Type of switching: Class D
- Frequency response: 20 - 20,000 Hz
- Distortion rate (THD): <0.1 %
- Power amplification (gain): 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V (not passed) V
- Protective circuits: DC, short circuit, overheating, overvoltage, delay at start-up
- Settings: gain, mass lifting (Ground Lift), limiter, mode, on / off, volume
- Clip indicators (clip), mode, power, protect (activated protective circuit), signal
- Line entrances: 2
- Line input connectors: Cinch (RCA), 6.35 mm jack
- speaker outputs: 2
- Pregnant output connectors: terminal blocks, Speakon compatible
- Sector voltage: Sector block
- intensity consumed (full load): 470 W
- Sector voltage: 115/230 volts (switchable)
- Dimensions (LXHXP): 482 x 44 x 244 mm
- Weight: 3.4 kg
Brand reference number:
LDXS400