The SRX818SP amplified subwoofer is compact and very powerful. Equipped with a JBL 2279F 38 cm speaker mounted in Bass SLR, this subwoofer was designed to occupy a restricted frontal area. It is equipped with a 20 mm base on the top allowing the insertion of an SS4-BK bar for use with satellite speakers SRX812P, SRX815P or SRX835P.
With its new series of SRX800 portable amplified speakers, JBL establishes the new standard for mobile sound system. By integrating latest generation JBL transducers, an amplification of Drivecore technology developed by Crown, a configurable DSP treatment incorporating FIR filters and an IOS and Android compatible Hiqnet control system, the SRX800 series is the perfect solution for any sound application requiring A complete and efficient distribution system. Each element of the SRX800 series has been designed to build a homogeneous and powerful system, easy to implement and foolproof robustness.
Designed for ...
Each detail of the SRX800 series has been designed and designed taking full account of its professional and intensive use. Ergonomic handles promote its good grip for tired transportation while its M10 suspension points and bars or feet stoves allow the design of any type of configurations. High -tech JBL transducers JBL DIFFERENTIAL DRIVE® transducers include 3 "windings and a reduced ferrite magnetic mass to limit the weight while increasing their admissible power and their response in the low frequencies. The JBL 2432H is the only engine in bedroom compression with neodymium equipped with a 3 "winding capable in its category to deliver a high level of power while keeping a clear and crystalline sound.
Unprecedented DSP Treatment
Each speaker in the SRX800 series incorporates a DSP Sharc processor clocked at 400 MHz allowing the management of high-tech audio-numeric treatments including 20 settings, 2 seconds delay, a signal generator, input mixing and monitoring of the amplification module, memorizable in 50 user presets. In addition, the system is completely compatible with the JBL V5 presets thanks to the FIR filters (without phase shift) operating at 96 kHz and the level of Levelmax level limitation (TM), identical to those used in the Line Array JBL VTX system.
Drivecore by Crown
Each speaker is equipped with an amplification module using technology and Drivecore circuits developed by Crown allowing to obtain a power of 2000W much higher than the standard of this category of amplified speakers. With a remarkable signal/noise ratio of 103DB, the SRX800 series is capable of producing an extremely high acoustic pressure level with an exceptional dynamic reserve and a very low distortion.
Hiqnet network control
Thanks to the complete integration of the Hiqnet network, the configuration of an SRX800 diffusion system is considerably simplified by a fully automated control interface. The network connection of the speakers is carried out by a wired Ethernet link via the Ethercon connectors or by a wireless connection with the addition of a WiFi router. It is then possible to control the system by audi- architect or hiqnet motion control from a PC computer or iOS and Android mobile devices.
type: 18 ", bass-reflex amplified subwoofer
Frequency response: 35 Hz - 120 Hz (± 3 dB) 29 Hz - 150 Hz ( - 10 db)
Maximum SPL @ 1 m: 135 db
Amplification: 1000W crest, class D
Components: BF: JBL 2279F, 460 mm (18 ")
Suspension: M20 base
Finish: Duraflex (TM) Black
Connectors: 2 x Neutrik XLR /Jack ( Input), 3 x Neutrik XLR (output), 1 x Neutrik Ethercon (network)
Dimensions: 683 x 684 x ??575 mm
Weight: 39.5 kg
Brand reference number:
SRX818SP/230
en 
