The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction.
Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
SPECIFICATIONS
- Cartridge Type: Electret Condenser
- Frequency Response: 20 to 20,000 Hz
- Output Impedance: 150 ohms (actual)
- Power Requirements: 48 Vdc phantom, 4.7 mA
- Common Mode Rejection: >50 dB, 50 Hz to 20 kHz
- Polarity: Positive pressure on front diaphragm produces positive voltage on output pin 2 relative to pin 3
- Polar Patterns: Cardioid, Omnidirectional
- Sensitivity (typical; at 1000 Hz; 1 Pa = 94 dB SPL): -37 dBV/Pa
- Self-noise (typical, equivalent SPL; weighted, IEC 651): 14 dB
- Maximum SPL @ 1000 Hz
5000 ohms load: 134 dB (159 dB, -25 Pad)
2500 ohms load: 139 dB (164 dB, -25 Pad)
1000 ohms load: 134 dB (159 dB, -25 Pad)
- Output Clipping Level
5000 ohms load: 15 dBV
2500 ohms load: 9 dBV
1000 ohms load: 3 dBV
- Dynamic Range
5000 ohms load: 131 dB
2500 ohms load: 125 dB
1000 ohms load: 120 dB
- Signal to Noise ratio: 80 dB
- Weight (Net): 156 g (5.5 oz.)
- Switch: Attenuator: 0, −15, −25 dB / Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz
Brand reference number:
SSP KSM141SLSTEREO
en 
