The Radial Pro MS2 is a microphone-level balanced signal splitter, designed to simultaneously transmit a signal to multiple destinations on stage. It is equipped with a transformer isolated output, and two direct outputs. The Radial ProMS2 is a high performance passive micro splitter that accepts symmetrical microphone signals and sends them to 3 outputs simultaneously. Since it's passive, you do not need to power it - just plug it in for a clean audio output without artifacts or color.
Inside the ProMS2, an Eclipse ET-MS10 transformer divides the signals. This model has a laminated nickel core that offers a broad frequency response and exceptional signal handling, with virtually zero distortion at all frequencies.
With more than 115dB of common-mode noise rejection, you can be assured that the buzzes caused by ground loops and industry noise will be kept to a minimum. The transformer is doubly protected against parasitic magnetic fields, on the one hand by a dedicated metal shell and secondly by the robust steel outer casing. This is complemented by radio frequency filtering and 100% discrete circuits.
Like all Radial products, the robustness of the case and connectors is legion. The design of these cases offers the unique advantage of allowing up to 8 units to be rack mounted with a Radial J-Rak. In terms of applications, the ProMS2 splitter allows the division of a signal in the studio to attack several preamps, send the signal from a stage microphone to several mixing consoles, or even separate the signal from a live configuration 'to feed a stream of diffusion, without any degradation sound ...
The ProMS2 Radial is a great tool that solves many problems in everyday life to multiply the micro DI signals with a disconcerting ease.
Specifications:
- Passive Circuit - Unbalanced 2.5K Ohm input impedance - 140K balanced output impedance - Frequency response 20Hz ~ 20KHz (+ 0dB -1dB) - Gain -0.5dB - Dynamic range> 140dB THD 0.001% - Noise level -140dB - Max input + 26dBu - Phase deviation 1 ° @ 20Hz - Eclipse Transformer ET-MS10 - Pad -30dB - Dimensions 84 x 127 x 48 mm - Weight 0.70 kg
Category: direct box Number of channels: 1 Lamps: no Digital conversion: no Frequency response: 20 Hz - 20 kHz THD: 0.001% @ 1 kHz / +4 dBu Max input level (dBu): 26
Integrated preamp: no Inputs: XLR Outputs: 2 x XLR Settings: attenuator -30 dB, mass switch Food: passive Dimensions (mm): 84 x 127 x 48 Weight (kg): 0.72
Brand reference number:SRA PRO-MS2
Related Accessories
OTHER MUSICIANS HAVE ALSO PURCHASED FOLLOWING THE EQUIPMENT!
en 
