Your shopping basket contains 0 item
Ref.: 209555
Online : more than 4 weeks (+)
Shipping: free
This item is warranted for 3 years
Shopping Points
1,111 Woodies: £9.97 (+)
PayPal Checkout

Payment with Paypal Express is fast and secure.

We send you the item(s) to the address entered in your Paypal account. You can modify this on the PayPal page if necessary. By default, the selected delivery is the standard delivery mode. If the delivery country entered on Paypal is not identical to that of your Woodbrass account, the shipping costs and prices may be different.

PayPal Checkout
Woodbrass price
Register here and stay informed about the next restock



- Balanced line level via 500 rack. +19dBµ to -11dBµ
- Input Impedance: 1MΩ Differential or single ended, common Mode 48KΩ.

- Output Impedance: Nominally 50Ω differential 25Ω single ended.
- Max. Output Level: Better than +22dBµ, balanced.
- Drive Gain: 30dB Range of control
- Output Gain: 30dB Range of control
- Frequency Response: Better than +/-0.5dB 20Hz – 20KHz pass band. Better than +/- 1.5dB 5Hz – 24KHz pass band.
- Bypass: Hard Relay True Bypass
- Power Consumption: 130mA +16V, <60mA -16V
- Four NOS Panasonic Low Noise High Voltage BBDs
- Premium "esoteric" TI/Burr Brown OPA1644 Op amps used throughout the analog signal path.
- Premium "Metallized Polyphenylene-Sulphide Film capacitors in the filter section.
- 2 Dual High quality Moog 6th order filters for anti alias and clock removal functions
- Premium THAT high CMRR front end with Servo DC Nulling.
- Premium THAT cross coupled differential drive output stage.
- Ultra fast, low noise linear power supply regulators for the lowest noise possible in an analog delay.
- Premium audiophile grade op amp upgrades though out for the lowest distortion and noise possible.
- Upgraded High speed Low noise op amp upgrades for all CV and control sections.
- Upgrades to the capacitors in all key sonic points to reduce microphonics, noise and improve sonic quality.
- 2.5 - 3.5 times the sonic headroom and rails in the audio signal path.
- Premium differential input and output sections utilizing DC servo modified THAT Corporation receivers and transmitters. (THAT In Genius 1200 Transformer simulating reviever with Moog designed DC servo offset removing, featuring over 1M input impedance and very high common mode rejection ratio, THAT Corp OutSmarts 1646 Balanced Line Driver for balanced transformer like floating outputs).
- Ultra Low noise and fast transient response linear regulators and voltage isolation networks.
- Complete design re-visitation with many small tweaks and adjustments to significantly open the sonic filed, warmth, lower noise and improve the sonic quality.
- True relay hard bypass.
- Low noise and low distortion gain and mixing sections with less coloration and distortion in the gain and mixing sections.
- Significantly lower noise, distortion, microphonics, and other objectionable artifacts due to improved components and design improvements.
- No VCA in the input, output, or mixer sections for lowered noise, distortion and coloration
- Stereo linking capability and firmware improvements for a wide variety of mono to stereo delay effects and and stereo I/O capability
- Improved and expanded LFO capabilities.
- Lower distortion and higher accuracy BBD chain due to the addition of 5 trimmer pots to dial in the BBD recombining balance and gain stage accuracy.
- Improved high end MUX circuitry in the 6th order anti alias filters and clock removal filters for lower noise and distortion.
- Added analog click track to tap tempo tracking.
- Flexible assignable CV buss.
- Improved signal monitoring chain
Brand reference number:MOOG104
Related Accessories
Sales & Advice
Call Center
kevin_c - laura_h
Contact Kevin: Local call rate UK 0845 686 8094
International 0033 240 382 948
Monday to Friday from 9am to 7pm
Saturday from 10am to 6pm.