close
Info
close
close
My shopping cart

Your Shopping Cart is empty...

Total:
0
close

My favourites

Your list of favourites is empty
close

LANGUAGES

France
English Version
Portugal
Luxembourg
Italia
Deutschland
Österreich
Nederland
España
favorite_border
favourites
icon-cart
Basket
close
filter_list FILTRER

Catégorie

Marque

Prix

Disponibilté

Avis

Voir les résultats

schoeps CMC 6 U

739
or
icon-cart Add
favorite_border
Online : sent within 7 days
shipping icon
Shipping: from 10000 €
warranty icon
This item is warranted for 10 years
reference icon
Ref.: 215916
Register here and stay informed about the next restock

Description

The capsule of a condenser microphone (the only type SCHOEPS makes) cannot be driven directly through the mic cable or through an input. A microphone amplifier must be inserted. One of the 20 MK capsules of the Modular System must therefore be screwed onto an amplifier to constitute a complete microphone.

The CMC 6 Ug is designed for standardized phantom power in 12 V and 48 V. Its circuit automatically recognizes the type of power supply (12 V or 48 V) and adapts to it. Its characteristics have essentially been little modified: only the current is adapted to the supply voltage. The current intensity is higher at 12 V than at 48 V. However, the power absorbed with the 12 V supply is lower. This is an advantage if you work with a battery.

A little technique: the amplifier supplies the capsule with the current which allows it to emit a signal. As this signal is very weak (at high impedance), it needs (current) amplification. To avoid any signal disturbance between the microphone and the input, it must be carried at low impedance and symmetrically. The CMC 6 Ug has a balanced class A output stage, without transformer or capacitor. This configuration results in very low output impedance, high resistance to interference, low distortion and low weight.

Features:
- Frequency Range: 20 Hz - 20 kHz
- Maximum output voltage: 1 V (0 dBV) on 1 kΩ load
- Maximum sound pressure (DHT<0.5%) with MK 4: 131 dB-SPL (P48, P12)
- Low cut filter: 20 Hz, 12 dB/Oct.
- Minimum recommended load impedance: 1 kΩ
- Output impedance: 42 Ω
- Maximum cable length: > 400 m
- Schoeps RFI Shield: Yes
- Power supply, standard and valid range: P48 / 20-52 V and P12 / 10-13 V
- Consumption: 4 mA (P48) and 8 mA (P12)
- Common mode rejection (@ 1KHz): > 55 dB
- Output: XLR-3M, analog, 1 channel
- Dimensions: 116 x 20 mm
- Weight: 60 g
- Finish: Grey

Brand reference number: 132005
Videos
Sales & Advice