basket
Your shopping basket contains 0 item
Ref.: 185021
Availability
Online : immediate shipping (+)
Shipping
Shipping: free
WARRANTY
This item is warranted for 3 years
Shopping Points
533 Woodies: £4.70 (+)
Add
PayPal Checkout

Payment with Paypal Express is fast and secure.

We send you the item(s) to the address entered in your Paypal account. You can modify this on the PayPal page if necessary. By default, the selected delivery is the standard delivery mode. If the delivery country entered on Paypal is not identical to that of your Woodbrass account, the shipping costs and prices may be different.

PayPal Checkout
Woodbrass price
£469.74
Public Price
£469.74

Description

The MP5A is a DISCRETE mic preamp with a DIRECT INPUT on the front panel. The MIC IN is transformer coupled in and out, and has a 20 dB PAD switch (effects both MIC and DIR), a 48V Phantom switch and a Phase or POLARITY switch. The PAD and POLARITY switches effect both inputs.. The inner, or larger (silver) knob sets the mic pre gain and the outer smaller (black) knob controls the output level. We chose the fader control for the outer knob so the gain knob, once set, won't be bumped when adjusting the output level.

The 8 seg LED VU meter follows the balanced output of the preamp. The level of the VU meter is adjustable over the entire range from off to +28. The PEAK led is set at +14VU or +18 dBu and can grab a fast peak and display it. An internal jumper selects the MIC PRE MAIN OUTPUT or the MIC PRE GAIN STAGE signal to feed the VU Meter. This allows the engineer to monitor the real mic pre gain or the output level of the MP5A. When monitoring the Mic Pre Gain, the meter shows the actual gain stage level, and is not effected by the output fader.

The Combo XLR/Direct input is for use with a hi-z instrument, etc. The TILT tone control works with both the MIC in and DIR in and has it's own TILT EQ IN switch, which is a hard wire bypass switch when out. When turned up, the tilt control has a 0 to 6 dB boost on the high end while cutting the low end the same. If it is turned down, tilt will boost the low end up to 6 dB and cut the high end up to 6 dB.

The Front panel XLR is multed to the rear panel XLR and that is also multed to the D-Sub "INPUT" on the rear of the V4. The "INSERT RETURN" input of the V4is a resistor isolated mic level input, that can be used when the MP1 is in a live recording situation and there is no splitter. It will bridge the mic line with 10X the impedance to minimize loading of the microphone.

Included with the MP5A Mic Pre is the ability to PFL the output to an external amplifier or to the mixer/master section for previewing the signal directly off the mic pre output.
Brand reference number:MP5
Similar items
Sales & Advice
Call Center
kevin_c - laura_h
Contact Kevin: Local call rate UK 0845 686 8094
International 0033 240 382 948
Monday to Friday from 9am to 7pm
Saturday from 10am to 6pm.