Carrello
Hai 0 articolo nel carrello
Total 0.00€
Vai al carello
-12%
Risparmia 98.50€Ref.: 215916
Disponibilità
Online : prima di 4 settimane (+)
Consegna
Consegna: gratuita
GARANZIA
Questo articolo è garantito 3 anni
Aggiungere
PayPal Checkout

Pagare con PayPal Express è veloce e sicuro.

Invieremo l'articolo o gli articoli all'indirizzo indicato nel tuo account Paypal.
È possibile modificarlo sulla pagina PayPal, se necessario.

Per impostazione predefinita, la modalità di consegna selezionata è la consegna a domicilio standard.

Se il paese di consegna indicato su Paypal non coincide con quello del tuo account Woodbrass, le spese di spedizione e i prezzi potranno variare.

PayPal Checkout
prezzo Woodbrass
725.00€
RRP
823.50€
Risparmia
98.50€
Tenetevi informati sui prossimi arrivi iscrivendovi qua

Descrizione

The capsules of condenser microphones (the only type which SCHOEPS manufactures) can't be connected directly to microphone cables or inputs; a microphone amplifier is required in between. Thus a complete microphone of the Colette series comprises any of the twenty available types of capsules combined with an amplifier.

The CMC 6 Ug is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same either way; mainly, the difference is that the current drawn at 12 Volts is greater than at 48 Volts. However, the 12-Volt mode consumes less power and might be preferred for battery-powered recording.

The microphone amplifier provides the electrostatic charge which the capsule requires in order to produce a signal. Since only a miniscule amount of current is contained in this signal, amplification of the current is required. To avoid interference to the signal on the way from the microphone to the input of the mixer or preamp, the signal is conveyed at low impedance and in balanced form. The CMC 6 Ug amplifier offers a symmetrical, transformerless, direct-coupled Class A output stage with low impedance, low distortion, and high freedom from interference.

Features:
- flat frequency response
- extremely low noise and distortion
- balanced, very low-impedance output
- can be used with very long cables
- well-protected against RFI
- for use with 12- or 48-Volt phantom powering

Specifications:
- Powering voltage: 12 / 48 V
- Current consumption with 12 V: 8 mA
- Current consumption with 48 V: 4 mA
- Impedance (at 12 V): 25 Ω
- Impedance (at 48 V): 35 Ω
- Low-cut frequency: 20 Hz
- Maximum output voltage: 1 V
- Minimum recommended load impedance: 600 Ω
- Length: 116 mm
- Diameter: 20 mm
- Weight: 60 g
- Surface finish: matte gray (g) or nickel (ni)
Riferimento contrassegnato07012
Prodotti simili
Consigli sull'ordine
Call Center
romain_c - laura_h
Contacta Romain: Contatta al 02 8736 9762
Costo di una chiamata locale.

Dal lunedì al venerdì dalle ore 9 alle ore 19
Sabato dalle ore 10 alle ore 18: