Introducing the Heritage Audio BritStrip — the culmination of 50 years of analog design in a single rack unit. Britstrip nails the sound of yesterday’s iconic recordings for today’s demanding engineers. The BritStrip combines a real-deal 73 mic preamplifier, an expanded 73 equalizer, a discrete Class-A DI, and the infamous diode bridge compressor from the Heritage Audio Successor. The closest equivalent of the BritStrip would be chaining together a 73JR, 73EQJR and mono Successor — a $3000 value pack in itself, with added routing flexibility.
MIC AMP SECTION
- Carnhill based, transformer coupled balanced inputs and outputs for added character and vintage vibe. - 73 style class A output stages bring the desired 73 sound to your mix or drum buses. - Microphone input impedance: HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for lo gain ribbon mics. Input is transformer balanced and floating. - Line input impedance: 10K Ohms bridging, transformer balanced and floating. - DI input impedance: Greater than 2 Megohms, unbalanced. - Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 ohms (factory terminated). - Maximum output: Greater than +26dBu into 600 ohms. - THD: Less than 0.025% at 1 Khz, less than 0.05% at 100Hz. - Frequency response: 20Hz ( +0.3dB ) to 20Khz (-0.2dB) - Maximum gain: Slightly greater than 80dB - Noise: Less than -125dBu EIN.
EQUALIZER SECTION:
- 73 High and low shelving bands with additional bell-like response. - 73 dual Vinkor inductor based mid band with extended Q functions. - 73 inductor based low pass filter.
COMPRESSION SECTION:
- Diode-bridge based compression excels in bringing 2nd order harmonic distortion characteristics and true vintage tone while eliminating nasty odd harmonic content. - Ultra-fast attack and release time options never found in vintage designs allows for far more flexible settings, including FET like sounds and volume maximizing without transient artifacts. - Complex sidechain filtering options work with the already common high pass filters, introducing mid band peak type filters and high-frequency compression, allowing bus correction not possible before. - Sidechain SEND and RETURN connections allow for external sidechain signals or further external processing of the internal one. - Blend control offers built-in parallel compression without any external equipment. Blend ON/OFF button allows for instant comparison in between WET and DRY signals. - Stepped controls for easy recall of settings.
Merkreferentie:RHA BRITSTRIP
Bijbehorende accessoires
ANDERE MUZIKANTEN HEBBEN OP HETZELFDE MOMENT DEZE ACCESSOIRES GEKOCHT!
nl 
