Close
menu
Europese Online-Shop
conseils : +33 257 880 074
nl 
Whether it's the gentle horn section of a classic Hollywood film soundtrack, the velvety richness of a jazz vocal, or the larger-than-life drum sound of a classic rock recording, there's a good chance that an RCA 44 series ribbon microphone was used in the studio when the sound was created. Used for over 80 years in recording and broadcast studios around the world, the RCA 44 ribbon design is as rich in history as it is in sound and character. This instantly recognizable sound produces thunderous bass due to the strong proximity effect, rich, full mids and unique highs that take the edge off harsh instruments.
The AEA R44 continues an iconic legacy of superb ribbon mics by delivering rich sound, full of character and color. Effective on a wide range of instruments and rooms, the R44 boosts mids and lows while smoothing high frequencies to produce a multi-dimensional sound unlike any microphone in the world. Used on everything from vocalists to full orchestras, the R44 is the ideal choice for capturing the tone of any voice or instrument while giving it its legendary ribbon character.
The passive R44 is available in two exteriors: the original museum-quality replica R44C and the aesthetically cost-effective R44CE. Both pickups sound identical and are exactly the same inside. The difference between the two lies only in aesthetics and price. The Active A440 is a flexible R44 with preamp with 18 dB of additional output. It is custom painted with the classic RCA transformer housing in umber color.
Features:
- Active ribbon microphone
- Active variant of R44 with a level increase of 18 dB
- Directivity: Figure 8
- 1.8 µm (4.7 x 59.7 mm) folded aluminum tape
- Ideal for vocals, bowed strings, woodwinds, brass, guitars and drums
- Frequency response: 20 - 20000 Hz
- Limit sound pressure level: 136+ dB SPL (1% THD > 1 kHz)
- Sensitivity: 30 mV/Pa (-33.5 dBV) at 1 kHz without load
- Output impedance: 92 Ohm
- Requires 48V phantom power
- 3 m fixed cable with XLR3-M connector
- Included: Microphone stand, protective cover and high quality carrying case
- Handmade in the USA
- Dimensions (H x W x D): 311 x 117 x 83 mm
- Weight: 3.1 kg
