Winkelwagen
0 artikel in uw winkelwagen
Totaal 0.00€
Naar mijn
-12%
U bespaart 260.00€Ref.: 125902
Beschikbaarheid
Internet : verzonden binnen 10 dagen
Levering
Levering: gratis
GARANTIE
Dit artikel is gegarandeerd 3 jaar
Toevoegen
PayPal Checkout

Betalen met PayPal Express is snel en veilig.

Wij zullen u het artikel of de artikels toesturen op het adres ingevuld in uw Paypal-account.
U kunt dat adres indien nodig wijzigen op de PayPal-pagina.

De volgende leveringswijze is standaard geselecteerd: standaard levering aan huis.

Indien het land van levering ingevuld op Paypal niet hetzelfde is als het land ingevuld in uw Woodbrass-account, kunnen de portokosten en de prijzen verschillend zijn.

PayPal Checkout
Woodbrass-prijs
1929.00€
Adviesprijs
2189.00€
U bespaart
260.00€

Beschrijving

Powerful, innovative and versatile for stage and studio alike, the Bassman 100T is a professional-level 100-watt tube head with enormous Fender bass sound and sparkling vintage Fender looks. Its dual-channel design uses modern technology to maximize classic technology, with classic Fender late-’60s/early-’70s “blackface” styling and a wealth of innovative features on the front and rear panels.

Features include a tube preamp (two 12AX7s) and power amp (one 12AT7 and four 6L6s); Vintage channel that delivers the full, warm sound of a classic Fender passive tone stack; Overdrive channel that delivers the aggressive and responsive sound of a modern active tone stack (choose between channels with included footswitch); rear-panel Fender Automatic Bias system that constantly monitors and re-biases tubes for perfect performance and alerts you when service is required; XLR output that delivers overdriven power amp tone (great for recording); rear-panel Output Power switch that lets you play or record at full 100-watt power, quieter 25-watt power, or silently via internal power soak (which captures the signal post-power amp); impedance switch (8, 4 or 2 ohms) and master volume with push/pull mute.

Model Name: Bassman® 100T
Series: Bassman® PRO
Amplifier Type: Tube
Electronics
Effects Loop: PreAmp Out / Power Amp In
Inputs: Two
Line Out: XLR (Pre/Post) w/ Level and Ground Lift
Speaker Jack: Yes
Channels: 2 - Vintage, Overdrive (footswitchable)
Rectifier: SS (Solid-State, Silicon Diode)
Controls: Vintage - VOL, BASS (pull DEEP), MID, TREBLE (pull BRIGHT); Overdrive - GAIN, BLEND, VOL, BASS (pull DEEP), MID FREQ, MID LVL, TREBLE (pull BRIGHT); MASTER (pull MUTE)
Hardware
Hardware Finish: Nickel Corners (Notched)
Cabinet Material: Plywood
Pilot Light Jewel: Yes (Remote LED Driven)
Handle: Two Spring-Loaded Handles, One Dog-Bone
Front Panel: Metal, Painted
Frequency Response: <10Hz - 22kHz (-3dB)
Input Impedance: >820k (INPUT 1), 136k (INPUT 2), 43k (PWR AMP IN)
Output Impedance: 220 ohm (PREAMP OUT)
Sensitivity: 12mVrms (INPUT 1), 1Vrms (PWR AMP IN) @ 100Hz
Signal To Noise Ratio: 95dB (Power amp), 46dB (Preamp)
Amplifier Depth: 10.63" (27 cm)
Amplifier Width: 24.5" (62.2 cm)
Amplifier Height: 10" (25.4 cm)
Amplifier Weight: 48.5 lbs. (22 kg)
Speakers
Impedance: Selectable 8, 4, or 2 Ohms
Tubes
Pre Amp Tubes: 2 x 12AX7
Power Tubes: 1 x 12AT7 and 4 x 6L6
Miscellaneous
Unique Features: OUTPUT POWER selector switch offering: 100W mode (full power), 25W mode (with automatic volume adjustment, identical tone at a lower volume!), SILENT RECORD mode (allows use of the tube power amplifier without speakers connected, XLR 'POST' signal is taken from power amp output). FENDER AUTOMATIC BIAS for output tube monitoring/adjusting
Accessories
FootSwitch: Vintage 1-button (P/N 0057172000)
Knobs: Black (w/ Chrome Insert), w/ 1-10, Set Screw
Merkreferentie:224-9106-000
Vergelijkbare producten
Hebt u een vraag of een advies nodig
Call Center
valentin_c - philippe_d
Contacteer Valentin: Neem contact op met Dorothée:
0033-240 382 948

van maandag t/m vrijdag 9.00 - 19.00 uur en zaterdag 10.00 - 18.00 uur: