Splitter/Mixer 8 ultra-flexible channels Behringer MX882
The MX882 is undoubtedly equipment that any sound engineer and any musician should always have at hand. This little "Savior of Lives" ultra-flexible has proven to be invaluable in many times during live performance, in professional recording studios, CD and digital production facilities, and in a variety of other scenarios where The show was simply to continue! The MX882 is ideal for distributing a stereo signal with several outputs (Splitter mode); Combine several signals in a stereo output (Mixer mode), or adapt the levels of the signals for a variety of audio applications (buffer amplifier). The UltraLink Pro MX882 can perform all these functions easily and simultaneously - it is literally the audio version of a "Swiss knife".
This is a mixing console - Splitter
The MX882 is made up of 6 mono channels, which can be used either as a Splitter or as a blender. For example, a stereo program source can be connected via the main inputs, then transported to one of the mono channels set in Split mode. For our example, we will use channel 1 with the split/mix switch in Out (split) position. Adjust the Channel 1 Balance/Pan command to define the share of the main left and right input signal which is routed towards the Mono XLR output of the channel 1. and you can do the same with the 6 channels of the MX882. In mixing mode, the entry signals of one or all of the 6 channels of the MX882 can be mixed on the main stereo output, with their commands Balance/Individual pan determining the placement of the signal in the stereo image ( Bang). It is advantageous that during operation in mix mode, the stereo signal of the main entrance is automatically sent to the main outputs - allowing you to combine a total of 8 individual signals. Mono input signals are always sent to their mono outputs, which means that each channel can also be used as an individual adaptation amplifier. The level commands for the corresponding channels allow the user to adapt the levels at will, with a maximum gain of +15 dB. The levels used in Home-Recording can easily be converted into studio levels (+4 DBU), and vice versa.
typical applications
As we have mentioned above, the UltraLink Pro MX882 is one of the most flexible systems of its type. Here are some of the applications to which the MX882 Multitage can respond: keyboard or battery submixer distribution amplifier for sound systems, dance clubs, theaters, churches, hotels, communication systems, etc. Additional module for mixing channels Additional module for effects and return level translator translator from -10 DBV to +4 dbu, or vice versa
a must for your sound equipment
As you can see, the MX882, incredibly flexible, is a very practical device that may well save your next concert or your next recording session. With its ultra-supplied price, you will want 2 or 3 for your studio, and a few others for your live rack. Go to your Behringer dealer or buy your UltraLink Pro MX882 online today!
Strengths
- line mixer 8 inputs / 2 very low noise outputs and line separator 2 inputs / 8 outlets
- Each channel can operate independently in mixer or splitter mode.
- Usable as an adaptation amplifier level 6 inputs / 6 outputs or as a line driver.
- Conversion of levels between -10 dBV and +4 dbu
- extremely wide bandwidth for maximum signal integrity
- 6 single inputs, 6 mono outputs, 2 inputs and 2 main outputs
- Input/exit level indicators at 8 segments for all channels
- internal cutting supply (100 - 240 V ~) for noise -free sound and low energy consumption
- Designed and manufactured in Germany
- Mixing console 8 inputs / 2 outputs
- Splitter 2 entries / 8 outputs
- Each channel can operate independently in mixer or splitter mode
- can act as a amplifier 6 inputs/6 outputs
-Semi-professional levels (-10 DBV) can be converted into studio levels (+4 DBU)
- Bandwidth width: 5 Hz - 200 kHz
Technical characteristics:
connectors
- 6x mono entrance
- 6x mono output
- 2x entrance
- 2x headphone output
- Entrance 4/8 segments
- output level indicators for each channel
- Communicable mains tension: 100 - 240 V
- Dimensions: 44 x 483 x 149 mm
- Weight: 1.7 kg- Integrated audio interface: no
- EQ Parametric medium: no
- RJ45 interface/network: no
- App check possible: no
- Weight (kg): 2.38
Brand reference number:
000-CCU01-00010
en 
