3x gratis a partir de 69 euros o financiar hasta 4x
2 millones de artículos
en stock
3 años de garantía
Entrega gratuita
a partir de 199€ de compra
30 días de garantía
de devolución del dinero
4 Woodbrass Tiendas
en París
Te notificaremos la llegada de la próxima remesa si te registras aquí
Descripción
The V4 U is the studio vocal microphone by SCHOEPS. It unites the outstanding technical characteristics typical of SCHOEPS with a timeless, classic design.
The “look” of the V4 U is based on the SCHOEPS CM 51/3 from 1951. But the V4 U is a thoroughly modern studio microphone. Its capsule, circuitry and mechanical construction are the result of extensive new development.
The capsule : A 33-mm beveled collar causes the capsule’s directivity to increase steadily and smoothly at high frequencies, as in a largediaphragm microphone. Meanwhile, the superior acoustic qualities of a small-diaphragm capsule like the extraordinarily smooth frequency and polar response are maintained. The capsule is elastically suspended internally to reduce solid-borne sound such as handling noise.
The electronics : Newly-developed bridge-type balanced output circuit. Maximum sound pressure level of 144 dB SPL, corresponding to an output level of 4.8 V. Output stage transformerless and free of coupling capacitors. The resulting output impedance is low and constant with frequency, while the symmetry is very high. Symmetrical, balanced output, the entire audio circuit is symmetrical from the output of the FET onward. High immunity to interference, with gapless shielding and a modern RFI filter at the output; very good electromagnetic compatibility.
Technical Specifications : - Pickup pattern Cardioid - Frequency range 50 Hz - 22 kHz - Sensitivity -36 dB (V/Pa), 16 mV/Pa - Equivalent noise level (A-weighted) 15 dB - Equivalent noise level (CCIR) 25 dB - Signal-to-noise ratio (A-weighted) 79 dB - Maximum sound pressure level (THD < 0.5 %) 144 dB-SPL - Maximum output voltage 4.8 V (13 dBV) with 1 kΩ load - Low cut filter 40 Hz, 18 dB/oct. - Minimum recommended load impedance 1 kΩ - Output impedance 50 Ω - Maximum cable length > 300 m - SCHOEPS RFI Shield Yes - Powering standard / Valid range P 48 / >43 V - Current consumption 3.3 mA - Common mode rejection ratio (at 1 kHz) > 80 dB - Output XLR-3M, analog, 1 channel - Length 194 mm - Diameter 34 mm - Width of the capsule head 45 mm - Head swivel degree span +/- 20° - Weight 302 g - Surface finish blue, gray
es 
