Dept. 10 AMPED 2
100W Amp + FX in a Compact Pedal
AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.
High Headroom Power Amp Design
The power amplifier’s unique, high-headroom design does not compromise on output even at 16 Ohms. Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. Blackstar’s patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.
Speaker Simulator and Direct Outputs
Fine-tune your cabinet, mic, and room simulations with our CabRig technology and output via XLR or stereo jack. Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.
Advanced Effects Processor
Four studio quality, fully configurable, built-in effects pedals (Drive, Modulation, Delay and Reverb) provides unparalleled versatility.
Reverb, Delay and Modulation With Freeze/Emphasis Effect
The Reverb type, time and level can be customised on the front panel of the amplifier. The Reverb tone can be customised using Blackstar’s Architect deep-editing software and saved to the Dept. 10 AMPED 2 in place of the default reverb. When the Reverb is active, holding the Reverb footswitch will activate the ‘Freeze’ effect.
The Delay type, time, feedback and level can be customised on the front panel of the amplifier. The Delay pedal can be placed pre or post the Amplifier section using Blackstar’s Architect deep-editing software. The Delay trails can also be turned on or off using Blackstar’s Architect software. When the Delay pedal is active, holding the Delay footswitch will activate the ‘Freeze’ effect.
The Modulation type, time, depth and level can be customised on the front panel of the amplifier. When the Modulation pedal is active, holding the Modulation footswitch will activate an ‘Emphasis’ effect. The current settings of the selected Modulation type will be emphasised, with the result being a more intense effect.
Universal Voltage
Dept 10. AMPED 2 is universal voltage so can be used anywhere in the world from 100V to 240V ~ 50/60Hz. Just stick it in your gigbag and hop on that plane.
Authentic Valve Amp Feel
The unique power amplifier design uses current feedback which mimics a valve amplifiers interaction with a speaker cabinet. This very high headroom design delivers the thump and presence of a valve amp with 100W power, into any speaker cabinet at 8 or 16 Ohms.
Features
- 100w Performance ready amp with multi effects.
- Unique high-headroom design that automatically matches to the speaker impedance to deliver maximum power and optimum tone with any 8 or 16Ohm cabinet set-up.
- Response control delivers three distinctly different and authentic power valve responses – EL34, 6L6 and EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp.
- Choose from USA, UK and Classic Amp voicings to dial in your perfect tone.
- 3 drive voices – Boost, Drive and Fuzz.
- Effects include Modulation, Delay and Reverb.
- Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, TRS stereo line out and XLR Mono D.I. for live use.
- Effects loop, 2x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.
- On board Chromatic Tuner allowing for tuning on the fly during live performances.
Specifications
- Power 100W
- Type Digital with Class D Power Amp
- Voice
- EQ
- Power Reduction
- Response
- Drive
- Modulation
- Delay
- Reverb
- Time
- Type
- Level (more settings via Architect)
- USB Audio (4 channel)
- XLR CabRig Output
- Effects Loop (series or parallel selectable in Architect)
- MIDI Control
- Speaker Outputs
- 9V DC Outputs 2 (maximum combined current 500mA)
- Voltage 100V to 240V ~ 50/60Hz
- Weight 1.96kg
- Dimensions 288 x 80 x 149 (mm)
pt 
