DSM Humboldt Simplifier MKII
The Simplifier MKII is an all analog, zero-watt guitar amplifier with stereo reverb, fully packed with routing and tone sculpting options. These features include:
- Preamp with 3 amp types (MS Brit, USA, and AC Brit).
- Stereo FX loop Return.
- Stereo Reverb.
- Power amp simulation with Power amp Type, Power amp Drive, presence and resonance.
- Cabinet simulation with cab type and Speaker color for each channel.
- Two Balanced DI outs with ground lift.
- Powerful headphone amplifier with volume control and aux input.
Preamp Section
The Simplifier MKII features a state of the art, low noise, and ultra versatile preamp that
reproduces the character of 3 of the most iconic classic amplifiers
PreAmp Type
Selects the following Amp Types:
- AC BRIT: Classic AC30 top boost sparkly and three-dimensional sound, bridging the normal and bright channel. A true British heritage since the 60's.
- USA: Classic Bassman tones. Sweet and dynamic with a balanced response. By far the most used amp on studio recordings.
- MS BRIT: Classic clean-to-crunch vintage plexi style amp with bridged hi/lo inputs. The sound that defined rock music.
Power Amp Section
The Power amp section models the behavior of a true push-pull all tube amp, including the compression, clipping, bias drift and variable frequency response that makes Tube power amps so special.
The Power amp type selector now changes the whole topology of each power amp, changing the tube type, bias and feedback characteristics of each model.
Cabinet simulation
Tweakable Cabinet simulator that takes the heritage and experience of ©DSM Noisemaker developing the most useful and innovative cabsims of the market. You can easily dial two independent cabinet simulators panned LEFT - RIGHT.
Cab Type Switch
A three way toggle switch allows you to choose independent cabinet STYLE for each side. 1x12 Combo, 2x12 or big 4x12 cabinet simulations that you can combine with any of the 3 preamps per channel, adding an extra dimension to your sound development. Now you can combine the different Cabinet sizes with different speaker types (Eminence blackface, Celestion Blue Alnico, Celestion Greenbacks, or even the points between them).
Speaker Color Knob
The speaker color knob sweeps between the characteristic high-mid response of the different speaker type. This control is crucial to get the desired texture out from the cabinet.
- Black is based on vintage Eminence high power speakers, typical of fender combos. These are smooth and balanced, great to compensate for the shrill from single coils and fender preamps.
- Blue is based on alnico blue speakers, midrangey and defined, but not harsh.
- Green is based on greenbacks, great for those marshall jangly tones, or extra definition is required
Specs
- Input Impedance:
- Input: 1Meg Ohm
- L & R return: 1Meg Ohm
- Output impedance:
- Send: 1K Ohm
- Unbalanced Outputs: 4.7K Ohms
- Balanced Outputs: 100 Ohms
- Headphone amp specs: Power: 135mW into 32 Ohms.
- Use with 16, 32, 64 and 96 Ohm Headphones. Loss of power can occur with higher impedance headphones.
- Power supply requirements:
- Voltage: 9 to 18V DC regulated
- Connector: 2.1mm DC jack, Cente negative
- Current consumption: 120mA
- Recommended supply current: 200mA and up
- Dimensions: 120 x 70 x 45 mm
- Weight: 360 grs
de 
