Power amplifier Class D Ultra-light of 1000 watts with compensation for loudspens Smartssense Behringer NX1000

The power amplifier NX1000 Offers 1000 watts (2 x 500 watts @ 2 ohms; 2 x 300 watts @ 4 ohms; 1000 watts in bridge mode on 4 ohms) in an exceptionally light (3.3 kg) and rack housing case . And because the NX1000 is much more effective than conventional conceptions, it works fresher and does not require massive thermal dissipators and heavy toric transformers generally associated with its conventional counterparts. Thanks to our "Zero-Attack" limitators, which offer a maximum output level with exceptionally reliable protection against overloads, and to the compensation for SmartSense Loudspeaker impedance, which provides a fully linear frequency response regardless of impedance Improvement loads, you can operate the NX1000 at full speed for hours. Our revolutionary class D technology with high density, associated with an ultra-effective cutting diet, guarantees that this light and light power plant will feed your equipment effortlessly for many years.

Class D - Massive power, its perfect
Thanks to our high density class D amplification technology, we are able to provide you with enormous power and incredible sound performance in an easy-to-use, ultra-portable and light case. The amplification of class D makes all the difference, offering optimal energy efficiency and eliminating the need for heavy power supplies and massive thermal penetrations. This amazing technology makes it possible to design and manufacture extremely powerful products which are much lighter than their traditional counterparts, while consuming less energy and protecting the environment.

An operation of disconcerting simplicity
The front panel commands and indicators provide the vital signs of your system at a glance. After pressing the Power button, the Power LED lights up to indicate that the amp is ready to work. All channels have positive relaxation gain with signal LEDs that come on when a signal is present, as well as LEDs of limit to indicate that the amplifier works at full capacity. Just as elegant as the facade, the rear panel shelters the entry connectors combined XLR and TRS 1/4 ", making the NX1000 compatible with almost all sources, symmetrical or asymmetrical. Supplied to ensure that each drop of output power reaches your speakers.

It is also on the rear panel that the switches are located which allow the NX1000 amplifier to operate in the double mono, stereo or mono bridge modes of your choice. The integrated crossover switch of the NX1000 Perses the amplifier in full-strang mode, where the output is sent without filter to your speakers, or in bi-ammp mode, which only sends low frequency content (<100 Hz) to subwoofers Passive, while high frequency content (> 100 Hz) is channeled towards your full-strang speakers.

Smartsense impedance compensation
Our new SmartSense technology gives punch to class D amplification, considerably improving the frequency response of the full range, with more powerful and dynamic bass, and a more fluid reproduction of high frequencies. The resulting output no longer depends on the actual load, but is made perfectly flat thanks to impedance compensation. The design of the NX1000 also incorporates a much higher amortization factor which allows better control of the amplifier on the speaker for stronger audio reproduction, especially in the area of ??the low frequencies.

Sound value
With its massive output powers, its light class technology and its equally light price, as well as all the equipment that a professional sound engineer can request, the Behringer NX1000 power amplifier is a serious amplifier for your applications more demanding.

Discover the Behringer NX1000 amplifier from your local dealer, or buy it online today, and find out why more and more professionals are turning to Behringer amplifiers for their superb performance and extraordinary value.

Strengths
- delivers 2 x 500 watts under 2 ohms; 2 x 300 watts under 4 ohms; 1000 watts under 4 ohms (bridge mode) and weighs less than 7.3 lbs / 3.3 kg.
- Ultimate reliability thanks to revolutionary high density class D technology with cold operation, with an almost zero "thermal accumulation.
- Ultra-effective cutting supply for noise-free sound, superior transient response and low energy consumption.
-Integrated stereo filter with cutting-up mode, high cut and full range.
-Impedance compensation for SmartSense speakers provides a fully linear frequency response, regardless of the loudspeaker's load impedance.
- The "Zero-Attack" limiters offer a maximum output level with reliable protection against overloads.
- relaxed gain commands for precise level adjustment
- Signal and limitation LED to 4 segments to monitor performance.
- XLR and 6.35 mm jacks input connectors for compatibility with all sources.
- Professional locking wrapping connectors for optimal reliability
- Independent protection against CC, BF and thermal overloads on each channel to automatically protect the amplifier and the speakers without stopping the show.
-The "back-to-front" ventilation system prevents heat accumulation for reliable operation.
- Designed and manufactured in Germany

amplifier
- Class D amplifier
- Crête power: 2x 160 Watts (8?), 2x 300 watts (4?), 2x 500 watts (2?)
- Crete power (braid mode): 620 watts (8?), 1,000 watts (4?)
- Frequency response: 20 Hz - 20 kHz
- Total harmonic distortion: <0.05 %
- signal/noise ratio:> 100 dB
- Attenuation actor:> 155 dB at 8?

Connectivity
- 2x XLR/TRS combo (A/B input)
- 2x lockable speaker connector (A/B output)
- power cable

Settings
- 2x volume (channels A/B)
- Feed
- Crossover (LF/Bande/HF, on the back)
- Modes: mono, stereo, bridged

Weight and dimensions
- Dimensions: 231 x 483 x 94 mm
- Weight: 3.3 kg