DPT 700 transmitter box
The DPT 700 transmitter box accepts microphones and line signals as input without having to adjust its sensitivity. This unique functionality guarantees safe operation and always optimal analog-to-digital conversion. The TB3M input circuit thus supports a wide range of instrument, headband and tie microphones. The legendary autonomy of AKG HF systems remains unchanged with 8 hours of autonomy with a single AA battery.
The DMS 700 digital HF microphone system has been developed to deliver the highest possible audio quality while allowing the operation of a large number of channels in a fast and easy mode of operation. It is the first digital HF system that meets international transmission standards.
class = "mb5 mt0"> Large frequency plans
Available in two frequency bands, each offering a frequency range of 155 MHz, the transmitters and receivers have great flexibility of operation, even in a very congested radio environment. These extremely wide frequency bands allow up to 100 transmission channels to be managed simultaneously.
class = "mb5 mt0"> Data encryption security
To allow the transmission of audio signals, they are digitized at a resolution of 24 bit / 44.1 kHz then encoded to be then conveyed to the receiver by the HF signal. During this encoding of the audio signal, a data encryption function is applied, a process not possible on an analog HF system. Its encryption functions offer all the security necessary for sensitive audio transmissions, because even if the HF signal is intercepted, it cannot be decrypted and therefore will not be audible.
class = "mb5 mt0"> A significant improvement in quality
The digital audio transmission process significantly eliminates distortions and background noise in high frequencies. It also protects the user from poor audio performance, in the case of poor HF transmission quality, because the digital signal is more easily reconstructable with respect to a modulated analog signal.
class = "mb5 mt0"> Low latency, DSP processing and legendary AKG autonomy
The DMS700 digital wireless microphone system incorporates a DSP processing module to apply low-cut filters, 3-band correctors and dbx® dynamic processing, while maintaining extremely low transmission latency. Although digital, AKG transmitters' legendary 8 hour autonomy for 2 AA LR6 batteries is maintained, to offer the most economical of usage budgets.
class = "mb5 mt0"> The strong points
- 100 simultaneous channels
- Signal encryption for sensitive audio transmission
- 155 MHz frequency bandwidth
- Diversity digital receiver
- Quick setup mode, spectrum analyzer and simulation functions for easy commissioning
- Robust all-metal construction
- Low-cut filter, 3-band corrector, compressor, dbx® limiter
- Data transmission to the transmitter by IR
- Microphone equipped with D7, D5 or C5 capsule
- Battery life 8 hours with control by 7-segment display
- Compatible with the antenna accessories of the WMS4500 system
Technical characteristics :
- Frequency Range: 548.1 to 697.8 MHz
- Type of Frequencies: Variable
- Modulation: Digital
- RF modulation: 10, 20, 30, 50 mW (ERP max.) Switchable by software
- Audio input: 1 - Balanced audio input on mini XLR, max 2V RMS
- Autonomy: 8 hours
- Modulation: 2 x 1.5V LR6 batteries
- Dimensions: 83.5 x 64.1 x 22 mm
- Weight: 82 g
Brand reference number:
DPT700V2-B1