complete microphone set for trumpet, trombone, saxophone or other cor mcm 114 set brass / sax / uni
complete set for the use of the neumann miniature system mic mcm clip on the flag of a trumpet, a trombone, a saxophone or another cor, on percussion instruments and on poles. contains: kk capsule 14, swapped pass sh 150, kc 1 cable fastener, cable ac 31, mcm 100 output floor, ws 110 wind glitter, clip mc 6. delivered in a very convenient soft case.
the real sound neumann for taking closer to live acoustic instruments.
strengths
• students the principle of electrets at the level of the neumann sound standards.
• sustainability decola the return on investment.
• only one capsule for strong and soft instruments
• works with key transmitters
the new reference in connection with reconciled
the miniature system clip mic mcm places the bar above for the electret capsules. and as a real neumann, he captures the typical sound of all acoustic instruments in live applications. it redefines the norm in terms of naturalness, practicality, reliability of assembly and longevity. the system includes nine specific mounting clips for a wide variety of acoustic instruments. modular construction allows easy replacements and guarantees a low cost of ownership.
the capsule: 8 units of perfection
a new level of tonal equilibrium, more body, especially in low and medium frequencies, and transparency in treble: the new cardioid capsule kk 14 overcomes the old limits of the principles of the electret and captures the signature sound of a wide range of acoustic sources. to achieve this, neumann has developed a design based on layers. each of the eight key components of the capsule is designed for optimum performance, manufactured independently and assembled by hand afterwards. strict quality control also guarantees an unparalleled level of tonal consistency. each capsule has exactly the same sound and delivers a neumann neutral sound, saving time when configuring and adjusting the equalizer, especially when multiple microphones are used simultaneously.
with an ultra low noise of 23 dba and an extremely high maximum sound level of 153 db spl, the kk 14 gives perfect results, whether they are very quiet or very strong instruments.
the titanium housing is resistant to the road and protects the most sensitive parts for years.
connects to all wireless systems
the mcm system includes interchangeable cable options with 3.5mm, lemo, mini-xlr 4-pin connectors, and microdot - no adapter is needed. the microphone can also operate with a wired connection using the high-end mcm 100 output stage and 3.5 mm jack cable.
mounting: soft for surfaces - reliable for engineers
a fundamental element of the mcm system is an exhaustive palette of mounting options that allow simple and reliable positioning of the microphone on any instrument. their mechanism houses even the most sensitive surfaces and is assembling a question of seconds, requiring only one hand for most instruments. the swan neck stand turns on one or two axes and hangs in increments of 45 ° to allow precise adjustment.
instrument sets
all system components are available separately. for many common applications, there are also complete sets in a flexible case with all the necessary components.
this packs includes:
• 1 x kk 14
• 1 x sh 150
• 1 x kc 1
• 1 x ac 31 (1.8 m)
• 1 x ws 110
• 1 x mcm 100
• 1 x mc 6
• 1 x security guide
• 1 x quick guide
• 1 x flexible case
characteristics:
• kk 14 capsule with mcm 100 output stage
• acoustic operating principle: pressure gradient transducer
• polar configuration: cardioid
• frequency response: 20 hz ... 20 khz
• nominal impedance: 50 ohms
• nominal load impedance: 1000 ohms
• signal / noise ratio (4), ccir (5): 63 db
• signal / noise ratio (4), weighted a (5): 71 db
• equivalent noise level, ccir (5): 31 db
• equivalent noise level, weighted a (5): 23 db-a
• max. spl (6) for thd <0.5%: 153 db spl
• power supply: 48 v ± 4v (p48, iec 61938)
• current consumption: 3.5 ma
• required connectors: xlr 3 f
• eligible atmospheric conditions (1):
• operating temperature: 0 ° c ... +40 ° c
• operating humidity: 0% ... 90% rel. hum.
• storage temperature: -20 ° c ... +70 ° c
• storage humidity: 0% ... 95% rel. hum.
• 94 db spl ? 1 pa = 10 ?bar
• 0 db ? 20 ?pa
1) all values ??are for a condensing moisture. values ??are valid for microphones or capsules of clean and well maintained microphones, respectively. any form of pollution of capsules and membranes can restrict said values.
2) to 1 khz in a nominal charge impedance of 1 kohms, tolerance ± 2 db
4) from 94 db spl
5) according to iec 60268-1; ccir weighting according to ccir 468-3, quasi-peak; weighting a according to iec 61672-1, rms
6) thd of the microphone amplifier at an input voltage equivalent to the output of the specified spl capsule.
Brand reference number:
8711
en 
