digital mixing console with 8 inputs with audio control and Bluetooth application, 60 mm cursors, 2 FX processors and USB/Audio Behringer Flow 8 interface
Digital mix with ease
Digital mixing tables offer studio quality treatment, the highest fidelity, the possibility of recalling all parameters and even remote operation. These are extremely attractive characteristics, but they have a cost - with a greater physical size and more complex operation requiring at least a certain degree of technical training in audio.
The millions of small format analog mixing tables built by Behringer over the years clearly tell us that there are many users who need a compact, affordable, reliable and easy -to -use mixer.
Typical applications very often just need to balance the level of a handful of sources. So why make things more complicated than they are? It is time to move on to something really new, offering everyone modern features and workflows in a simple and compact form - this is the moment of Flow 8 digital mix.
ez-gain assisted gain staging (assisted gain)
Have you ever heard someone say "Do you have to pay attention to your staging gain"? Do you know what the "gain structure" consists of? When you are interested in clean and healthy signals, with low noise and low harmonic distortion, setting the right amount of preamp gain is essential. It is a question of defining the quantity of amplification which a signal receives when it enters the mixer. As the sources signals can be very varied, going strongly on the Caisse Claire to the subtle buzzing of the bees, there is not a single gain that suits all possible uses.
The staging of the gain is always a compromise and finding the right one requires either experience and technical knowledge, or the new ez-gain function of Flow 8. This function allows you to monitor signals on one or all channels in Even time, until you think the strongest sounds were used. Ez-Gain then automatically adjusts the track gain to obtain an optimal margin.
By the way, Ez-Gain automatically activates the 48 V ghost power of the micro 1 or 2 inputs when no signal is detected, in case you have forgotten to do so.
Complete application remote control
Let's look at things opposite, the small mixing tables are more often placed where the cables end, rather than in a position where they would be the most useful for controlling mixing. You may need to stretch to control the levels or move away from the mixer to judge whether your adjustment to the desired effect. It's finish !
Flow 8 mixing tables offer full distance control from practically any Android or iOS device, which gives you the freedom to go exactly where the sound is ideal for making any kind of adjustment. Adjust the 9 -band equalizer for the main speakers of the sound system, adjust the compressor to the low guitar or adjust the mix for talents on stage.
Configuration assisted for beginners
Are you new in the audio world and you don't know which signal to put on the different entries? You do not know how to use the equalizer or the compressor for dedicated signals? No problem. The Flow 8 application offers you a unique configuration assistant that guides you step by step to make your music shine. After selecting the type of input, the assistant offers presets and tells you where to connect the cables. Thanks to this innovative function, you can add your instruments and microphones, regardless of your skill level.
Total reminder of all parameters
Do you record a podcast one day and voices the next day? Do you mix several artists on the same concert? The Flow 8 is your permanent companion for all audio applications where you need perfectly adjusted preset, available in seconds. The integrated snapshots library and the possibility of storing an unlimited number of snapshots by Flow 8 application gives you instant and unlimited power. Store, edit and instantly load the mixing settings via equipment or application. You can even trigger snapshots loading with a connected pedal to give life to your performance. The Flow Mix application even offers a recall function allowing to load the effects of effects, channels, main tracks, return or routing (requires the firmware 11739 or higher) separately. While the equipment offers 15 internal storage locations for instant preselections, the application can store an unlimited library of snapshots sorted by name, date and time.
Exceptional audio quality (on the move)
With its two micro Midas preamps and its internal treatment 32 VFP, the Flow 8 joins the series of digital mixing consoles X32, X-AIR and Wing. Although the form factor and the number of inputs/outputs are specifically adapted to small configurations, each individual channel offers crystalline sound and retains the sound quality of its ancestors. All the channels offer a 4 -band parametric equalizer, compression, as well as 2 FX departures and 2 monitors departures. All the main and return buses have a 9 -band parametric equalizer and a limiter to avoid unexpected volume peaks on your speakers.
Are you looking for a powerful sound?
There is reverberation and there is the reverb. Flow 8 has two independent Studio -quality independent effects, each with 16 presets to refine your instruments and your voices with effective depth effects.
The 12 reverberation programs range from a very short but lively atmosphere to very long and soft temple or stage simulations. They are all available in two versions and their time of decline can be adjusted continuously. In addition, you have various delay and modulation effects for all styles and all applications.
Integrated Bluetooth streaming
Since compact speakers have dominated the consumer market, Bluetooth has established itself as a standard for audio connections in the public world. The mini-jack sockets are increasingly replaced and many smartphones and tablets require special adapters to issue analog audio signals. This is why the Flow 8 offers an integrated Bluetooth receiver, which allows you to comfortably listen to music between two shows, without annoying adapters and without having to stay all the time near the mixing console.
The BT audio connection for audio playback can be connected independently of the remote application of the Flow 8. While using audio BT for reading on a mobile device, BT can be used separately on another device for the 'Control application, if you wish.
Flow 8 Clamp option - Simple and solid
The Flow 8 Clamp option is based on the original design of the side cap of the Perform series of TC Helicon, which uses a special material combining extreme longevity and a reliable and solid connection with the micro foot. It consists of a metal support which screws on the mixer table and an exclusive plastic part which clips on the microphone foot without any screws. You can choose to mount the pliers on the support according to 3 angles (0 °, 15 °, 30 °) depending on your favorite orientation of the blender.
The Flow 8 Clamp is designed to put your Flow 8 mixer at hand during your performance. On stage for a small club concert or in a recording configuration, the best place will often be right next to your microphone foot. It avoids the unnecessary congestion of cables and keeps the control surface of your Flow 8 mixer permanently accessible. The pliers is designed for standard microphone feet of 5/8 "diameter (not exceeding 16.5 mm).
Multichannel USB interface
The internal USB interface offers separate modes for streaming and recording applications, providing up to 10 recording tracks and 4 reading channels. The main mix or any entry signals can be diffused or recorded individually. This makes Flow 8 the ideal partner for DAW domestic recording with latency, streaming and podcasting. No additional USB audio interface is necessary. All input signals and main stereo mixing can be sent to audio applications on a Mac, Windows or Linux system for recording, editing or streaming.
Whether you are a singer, composer, small ensemble, teacher or presenter, player, podcaster or videobloger, that you produced at home or that you play live in bars, cafes or on the street, whether you train or that you You produced ... Flow 8 assures you impeccable audio quality and helps you create an amazing sound with ease.
And above all, Flow 8 digital mixing consoles are available today in our partner stores around the world!
Strengths
- Digital mixer with very low noise and high power reserve with wireless remote control.
- Flow app for a Bluetooth remote control from mobile phones or iOS/Android tablets
- 60 mm channel faders and main rotary control with LED necklace
- The Ez-Gain function analyzes the signals of your application and automatically regulates the gain for an optimal headroom.
- Two micro midas preamps with 48 V ghost power and programmable gain.
- two additional micro/line inputs on Jacks Combo XLR/TRS
- Two pairs of symmetrical stereo line entrances, each with a hi-z jack for the direct connection of a guitar/bass.
- All channels have an equalizer and a 4 -band compressor, 2 FX starts and 2 instructor departures, while the monitor and principal buses are equipped with an equalizer and a 9 -band limiter .
- Two independent Studio quality independent effects, each with 16 preselections including reverberations, deadlines and modulation effects.
- USB IT audio interface 10 x 2 integrated channels, with a resolution of 48 kHz / 24 bit.
- Bluetooth audio streaming to add accompanying tracks to your performance, or to listen to music during a break.
- Main symmetrical outputs on gold plated XLR and symmetrical monitoring outlets on 6.35 mm jack.
- Flow application with assisted configuration, unlimited instantaneous of the mixing table and intuitive and customizable stage view.
- FX, FX and Tap Tempo setting buttons
- Input for switch to the foot allowing to control the mute of the effects, the tempo or the functions of climb/descent of the presets.
- The optional micro foot adapter allows you to place the mixer at hand of your performance (Flow Clip or P16-MB not included)
- USB power supply via the AC adapter (included) or the feed bank (not included)
Technical characteristics:
Micro inputs
- Micro 1/2 inputs
- Type 2 x xlr jacks, symmetrical
- E.I.N. from microphone (20 Hz to 20 kHz) -129 DBU, weighted A
- Distortion (THD+N) <0.004%, weighted A
- Maximum input level +20 DBU
- Impedance 10 k? symmetrical, 5 k? asymmetric
- Micro 3/4 inputs
- Type 2 x XLR / Jacks Combo 1/4 "TRS, symmetrical
- E.I.N. from microphone (20 Hz to 20 kHz) -117 DBU, weighted A
- Distortion (THD+N) <0.01%, weighted A
- maximum input level xlr: +6 dbu
- TRS: +26 DBU
- XLR impedance: 2 k? symmetrical, 1 k? asymmetric
- TRS: 20 k? symmetrical, 10 k? asymmetric
- gain range -20 dB at +60 dB
- Ghost power +48 V, switchable (entries 1/2 only)
Line entries
- Type 2 x Jacks TRS 1/4 ", symmetrical (5L / 7L channels)
- Impedance 20 K? symmetrical, 10 k? asymmetric
- gain range -20 dB at +60 dB
- Distortion (THD+N) 0.005%, weighted A, gain 0 dB, outing 0 dbu
- Maximum input level +22 DBU
Guitar inputs (Hi-Z)
- Type 2 x Jacks TRS 1/4 ", symmetrical (6R / 8R channels)
- Impedance 2 m? symmetrical, 1 m? asymmetric
- Distortion (THD+N) 0.005%, weighted A, gain of 0 dB, outing of 0 dbu
- Maximum input level +19 DBU
Channels Eglizer
- Low ± 15 dB @ 20 Hz, Shelving
- low medium ± 15 dB at 300 Hz
- Haut-medium ± 15 dB at 1.5 kHz
- High ± 15 dB @ 20 kHz, shelving
Monitor outputs
- Type 2 x 1/4 "Jacks, symmetrical
- Impedance 75 ?, Symmetrical
- Maximum output level +14 DBU
- Main outings
- Type 2 x xlr jacks, symmetrical
- Impedance 150 ?, Symmetrical
- Maximum output level +14 DBU
Phones output
- Type 1 x Jack TRS 1/4 ", Stereo
- Max output level. +18 DBM / 40?
- Input for control pedal
- Type 1 x Jack TRS 1/4 "(point / ring normally open)
- Configurable function FX Mute / Tap Tempo or Snapshot Load Next / Previous
Input / output and treatment
- 10 Hz frequency range at 22 kHz (+0/-1 dB)
- Dynamic range, analog input towards analog exit Typ. 108 dB
- Latence of E/S 0.6 ms
- 32 -bit signal processing VFP (Vector Floating Point)
- Conversion A/D - D/A 24 bits/48 kHz
- Dynamic range 114 dB
- Number of input treatment channels 10 entrance channels, 4 FX Return channels
USB audio interface
- USB 2.0 interface type
- type B connector
- 24 -bit / 48 kHz bits depth
- channels 10 out / 2 in
- Bluetooth
- frequency range 2402 MHz ~ 2480 MHz
- Number of channels 79
- Version compliant with the Bluetooth 4.0 specification
- Compatibility supports the A2DP 1.2 profile
- Max communication scope. 12 m (without interference)
-maximum output power 8 dBm
- power supply / voltage
- Micro-USB connector
- 5 VDC 2A power supply
- Max electricity consumption. 10 W (typ. 5 W)
Dimensions / Weight
- Dimensions (H x W x D) 48 x 229 x 172 mm (1.9 x 9.0 x 6.8 ")
- weight 1.4 kg (3.1 lbs)
Brand reference number:
000-DNM01-00010
en 
Verified
