The SUB618 is an active bass-reflex subwoofer with a 600 W RMS class D power amplifier with SMPS and is equipped with an 18-inch transducer. The system delivers exceptional sound pressure levels (up to 133db) despite its compact case, while ensuring a reproduction of clean frequencies and impressive precision. The exceptional audio performance of the SU 600 allow the user to build most sound systems with a single SU and 2 full range speakers, avoiding any external treatment or crossover thanks to a balanced XOver signal to the left and right speakers.
The commands on the amplifier panel allow the user to operate with a mono or stereo audio power supply, activate the polarity inversion and choose the output liaison mode (True Bypass or Xover). If you need a little more punch, you can adjust an equalizer to boost low frequencies thanks to the Sub Mode switch.
The series has a complete grid in a light wooden box (total weight 31kg /68 lbs) reinforced by a robust black coating and scratch -resistant. The sculpted side handles improve portability. The design of the upper face facilitates the stacking of subwoofers in large systems and has a mounting thread on a M20 post to stack full range speakers.
Characteristic:
? Subwoofer 18 "Active bass reflex ? Class D 1200 W crest amplifier ? Max 133 DB SPL ? Seero symmetrical serene ? Link or Xover symmetrical stereo output mode ? Compact and robust wooden box ? light ? Polarity switch ? Flat or Boost fashion switch
Technical characteristic:
Technical data ? Type of loudspeaker: active semi-hidden subwoofer
Acoustic data ? Frequency response [-10dB]: 35 - 130 Hz ? NPA maximum: 133 dB ? Directivity: omnidirectional ? LF: 18 " ? Coil: 2.5 "
amplifier ? AMP TECHNOLOGY: DIGIPRO G3 ? ? AMP Class: Class D ? Power PRG: 600 W ? Peak Power: 1200 W ? Power Supply: 1000 W SMPS with PSU Auto-strang (110v ~ and 220v ~)
Processor ? Controller: DSP 56 bit ? AD/DA converters: 24 bits/48 kHz ? Limiter: double active, rms/peak, thermal ? cutting frequency: 90, 120 Hz ? LF-XOVER output slope: 24 dB/octave ? Commands: selection of the X-Over frequency, time switch up to 4.5ms, phase inversion switch, output mode commutator (link/X-over), mini-USB port type "B" ( service data)
Entrance ? Signal input: 2x XLR ? Signal output: 2x XLR X-Over Out/Link Out
mechanical ? Box: plywood, black PVC cover ? Width: 500 mm ? Height: 625 mm ? Depth: 690 mm ? Weight: 31.1 kg
Brand reference number:1030102570
Related Accessories
OTHER MUSICIANS HAVE ALSO PURCHASED FOLLOWING THE EQUIPMENT!