Roland Rubix22

Essential Information About the Roland Rubix24 USB Audio Interface

• 24-bit / 192 kHz High-Resolution Audio for clear, detailed, and faithful recording and playback.
• Two combo XLR / 1/4-inch jack inputs with +48 V phantom power and Hi-Z mode on input 1 for guitar or bass.
• Direct monitoring and dedicated controls (level, output, headphones) to record without being distracted by latency.
• Compact and robust design, designed for home studios and mobile setups (Mac, PC, and iPad).

A Rubix Interface Designed for Portable Studios, Without Compromising Signal Cleanliness

The Rubix24 follows the spirit of the Rubix series: offering a USB interface that is easy to integrate but capable of delivering clear, defined, and production-ready sound. Roland has especially refined the audio chain "from input to output" to maintain a very low noise level, a crucial point when layering takes (vocals, guitars, synths) and aiming for a clean mix right from recording.

Who It's For and In Which Uses the Rubix24 Makes a Difference

The Roland Rubix24 is aimed at musicians, beatmakers, podcasters, and producers who want a reliable 2-input / 2-output sound card to record a voice and an instrument, or two simultaneous sources. Thanks to the MIDI connectivity (IN/OUT), it also integrates very well into a keyboard and machine-oriented studio. Its USB operation facilitates mobility, and its iOS compatibility allows building a compact setup with an iPad to compose, record, and create demos anywhere.

Key Features for Efficient Recording, Streaming, and Producing

Preamps, Hi-Z, and Phantom Power: True Input Versatility

The two combo inputs accommodate microphones (XLR) and line/instrument sources (1/4-inch TRS jack). Activate +48 V for a condenser microphone, or Hi-Z on input 1 to plug in a guitar directly with the correct impedance. The SENS controls per channel allow quick gain adjustment, while the level indicators help avoid clipping.

Practical Tools: Comp/Limit, Loopback, and Ground Loop Management

For more controlled takes and live content, the Rubix24 includes functions rarely this accessible: COMP / LIMIT (with type selection), LOOPBACK to send computer audio back into your stream, and a GROUND LIFT switch useful for reducing hum in certain setups. Add to this the DIRECT MONITOR, MONO mode, and headphone source selection, and you get an interface designed to record and monitor your listening with precision.

Technical Specifications

Number of Channels

• Recording: 2 channels
• Playback: 2 channels

Signal Processing

• PC Interface: 24 bits
• AD / DA Conversion: 24 bits

Sampling Frequencies

• AD / DA Conversion: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz

Interface

• USB Hi-Speed
• MIDI IN, OUT

Connectors

• INPUT (1L, 2R): XLR (balanced, phantom power: +48 V, 6 mA max per channel)
• INPUT (1L, 2R): 1/4-inch TRS jack (balanced)
• PHONES: stereo 1/4-inch jack
• OUTPUT (1L, 2R): 1/4-inch TRS jack (balanced impedance)
• MIDI: IN, OUT
• USB Port: USB Type B
• DC 5V Port: USB Micro B
• Input 1L compatible with high impedance (Hi-Z)

Controllers

• SENS 1L, SENS 2R knobs
• Hi-Z switch
• 48V switch
• THRS button
• COMP / LIMIT switch
• DIRECT MONITOR button
• MONO switch
• OUTPUT knob
• PHONES knob
• POWER SOURCE switch
• LOOPBACK switch
• COMP / LIMIT TYPE switch
• GROUND LIFT switch
• PHONES SOURCE switch

Indicators

• Level indicators (1L, 2R)
• Level indicator (COMP / LIMIT)
• Power indicator
• Hi-Z indicator
• 48V indicator
• COMP / LIMIT indicator

Levels and Performance

• Nominal input level (XLR): -60 to -12 dBu
• Nominal input level (1/4-inch TRS): -44 to +4 dBu
• Maximum input level (XLR): +2 dBu
• Maximum input level (1/4-inch TRS): +18 dBu
• Nominal output level (OUTPUT): -6 dBu (balanced impedance)
• Maximum output level (OUTPUT): +8 dBu (balanced impedance)
• Maximum headphone output power: 20 mW + 20 mW (47 ohms load)
• XLR input impedance: 4 k ohms or more (balanced)
• 1/4-inch TRS input impedance: 15 k ohms or more (balanced)
• Hi-Z input impedance (input 1L, Hi-Z active): 500 k ohms or more
• OUTPUT impedance: 2 k ohms (balanced)
• PHONES impedance: 47 ohms
• Residual noise level: -94 dBu typical (SENS min., input terminated with 600 ohms, IHF-A)
• AD dynamic range (INPUT): 104 dB typical (SENS min.)
• DA dynamic range (OUTPUT): 109 dB typical
• 0 dBu = 0.775 Vrms

Power Supply

• Powered via computer USB, DC 5V
• Consumption: 500 mA

System Compatibility

• Windows 7, Windows 8, Windows 8.1, Windows 10
• Mac OS X 10.10 or later
• iOS 9 or later

Dimensions and Weight

• Dimensions: 145 (W) x 165 (D) x 46 (H) mm
• Dimensions (inches): 5-3/4 (W) x 6-1/2 (D) x 1-13/16 (H)
• Weight (main unit only): 11.0 kg
• Weight: 2 lbs 4 oz

Included Accessories

• Installation Guide
• "SAFE USE OF THE DEVICE" leaflet
• USB cable
• Ableton Live Lite serial number card