Introducing the latest and most portable addition to the Alesis Strike Amp family – the Strike Amp 8. This electronic drum amp is your perfect practice companion, featuring a handsomely-housed 8” woofer and built-in mixer. Want to invite some friends over to jam? The Strike Amp 8 cuts through the mix so you won’t get drowned-out by your bandmates. Whatever the situation, the Alesis Drums Strike Amp Series are the best amps to power your drums.
2000 Watts of Power and Clarity
With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker will always play loud and clear, in any space, in any situation—whether you’re performing, recording or rehearsing. The heavy-duty 8-inch low frequency driver really adds the “kick” to kickdrum. And the high-frequency compression driver in its computer-optimized waveguide conveys all the brilliance and snap of your snare drum and cymbals. Power. Precision. Drama. Using the Strike Amp 8 is like driving a race car that’s absolutely glued to the track and it never run out of horsepower.
Feature Packed - The BEST Amp to Power Your Drums!
But there’s a lot more to this speaker than just pure power and portability. A lot more. The Strike Amp 8 has all the versatility and features needed to fit in anywhere and it’s a snap to set up and use. You can use it vertically or tilt it back horizontally like a stage monitor. There’s an XLR output to link another Strike Amp 8 or send your performance to another input device. Need to customize the sound for that “just right” tone? Use the Contour EQ control. And the (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator means there is virtually unlimited hookup versatility and you’ll never unknowingly overdrive the speaker into distortion.
FEATURES Output Power - 2000 W (peak, 1300 LF + 700 HF) - 1000 W (continuous RMS, 650 LF + 350 HF) Drivers - Low-Frequency 8.0” (203 mm) driver, 2.5” (65 mm) high-temperature voice coil - High-Frequency 1.4” (35 mm) neodymium driver with precision waveguide Crossover Frequency - 2.5 KHz Maximum SPL - 129 dB (peak), 126 dB (continuous) (dB-SPL @ 1 m) Frequency Response - 62 Hz – 20 kHz (+3 dB) Frequency Range - 52 Hz – 22 kHz (-10 dB) Horn Coverage - 90º horizontal x 60º vertical (nominal) Equalization - Contour switch with low- and high-frequency +3 dB boost Connectors - (2) XLR/TRS 1/4” (6.35 mm) combo inputs - (1) XLR link output - (1) IEC power cable input Controls - Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch Indicators - Power LED (rear panel), clip limiter LED Protection - Electronic clip, thermal & transducer overdrive Power - Connection IEC - Input Voltage 100 V~, 110–120 V~, 220–240 V~; 50/60 Hz (switchable) - Fuse 100–120V T10AL AC250V 220–240V T5AL AC250V - Consumption 800 W Enclosure - Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille Mounting - Standard 36 mm pole socket Dimensions - (height x width x depth) 17.1” x 10.1” x 9.6” 434 x 256 x 245 mm Weight - 20.2 lb. 9.2 kg