Features:
- Electro-Voice RE3-BPHW-8M
- Headset microphone kit + bodypack transmitter + wireless receiver, including:
- Electro-Voice RE3-ACC-HW3
- Headset microphone
- Pre-polarized condenser capsule
- Polar pattern: supercardioid
- Frequency response: 30 Hz - 18 kHz
- Impedance: 1000 Ω
- Maximum SPL: 130 dB SPL
- Sensitivity, open circuit voltage, 1 kHz: 0.5 mV/pascal
- Power supply: 3-9 V DC
- Connector: TA4F
- Detachable cable: 1150 mm
- Supplied with: Windshield
- Weight: 38.5 g
- Electro-Voice RE3-BPT-8M
- Bodypack transmitter for wireless microphone system
- Carrier frequency band: 8M (823 MHz - 865 MHz)
- Synchronization frequency: Ultrasonic 40 kHz
- Frequency oscillation mode: Phase-locked loop (PLL)
- Frequency response: 63 Hz~16 kHz ±2 dB
- Display: Backlit LCD screen
- Radio stability: <±10kHz@Fc
- Modulation frequency deviation: Wideband FM deviation ±48 kHz
- Harmonic radiation: <-50 dBc
- Display: Backlit LCD screen
- Connector: TA4F connection (Mini XLR 4-pin)
- Pin 1: Ground
- Pin 2: Microphone input
- Pin 3: +5V bias
- Pin 4: +5 V via 2.2 kΩ
- Power supply: 2 x 1.5V AA batteries (LR6) or rechargeable NiMH battery
- Charging contacts for battery recharge on RE3-ACC-BC2 base (sold separately)
- External flexible 1/4 wave antenna
- Robust metal housing
- Dimensions: 81.5 x 64.5 x 25 mm
- Weight: 174 g
- Electro-Voice RE3-RX-8M
- Receiver for wireless microphone system
- Carrier frequency band: 8M (823 MHz - 865 MHz)
- Synchronization frequency: Ultrasonic 40 kHz
- Frequency oscillation mode: Phase-locked loop (PLL)
- Diversity: Antenna diversity
- Bandwidth: 36 MHz
- Signal-to-noise ratio: >100 dB(A)
- Total harmonic distortion (THD): <0.6 % @1 kHz
- Reception sensitivity: -81 dBm for -12 dB SINAD
- Frequency response: 51 Hz~16 kHz ±2 dB
- Antenna type: Removable ½ wave with BNC connector
- Antenna power supply: DC12 - 15 V/100 mA
- Display: Backlit LCD screen
- Audio frequency output level:
- Ref: ±22.5 kHz @1 kHz
- 6.3 mm jack: -10 dBV
- XLR: -4 dBV (Line) -24 dBV (MIC)
- Output impedance: 240 Ω (unbalanced) 1,400 Ω (balanced)
- Display: Backlit LCD screen
- Connectors: XLR + 6.35 mm jack
- Power supply: 12V 0.5A power adapter included
- Robust metal housing
- Dimensions: 210 x 175 x 44 mm
- Weight: 1.23 kg
Brand reference number:
ELERE3BPHW8M
en 
