Speed-Free Recordings Thanks to the FR-AV2’s advanced recording format, which works at a digital resolution of 32-bit floating point and a sampling rate of up to 192 kHz, you will never have to abandon a recording because it is saturated or the audio level is too low. When recording at lower digital resolutions, such as 16-bit or 24-bit, high-level sound sources can create digital clipping that cannot be corrected later.
High-End Combo Inputs (XLR/TRS) Connect microphones and professional line-level sources directly to the FR-AV2’s two Ultra HDDA preamps. With an equivalent noise level of just –127 dBu at the input, your recordings will have maximum clarity, with virtually no background noise. In addition, the 3.5 mm stereo input allows you to use wireless receivers, lavalier microphones or any audio source of your choice.
Full Timecode Generation The FR-AV2 allows you to simplify your video equipment and take fewer devices on set. The recorder sends and receives timecode via its 3.5 mm jack input/output for DSLR cameras, and it supports jam-sync on all external timecode-capable devices. Using the optional AK-BT2 Bluetooth adapter, you can also sync to the timecode of Atomos UltraSync Blue-compatible devices.
Features: - 2-channel audio recorder with dual A/D converter - Up to 192 kHz sampling rate - Up to 32-bit floating-point resolution - Receives and sends timecode (LTC) for synchronization with a video camera - Simplifies post-production (Tentacle compatible) - Wireless timecode synchronization with compatible Atomos products (requires optional Tascam AK-BT1 or AK-BT2 Bluetooth adapter, not supplied) - Bluetooth audio monitoring with optional Tascam AK-BT2 Bluetooth adapter, not supplied - 2 microphone/line inputs on XLR/6.3 mm combo jacks - 1 stereo line input on 3.5 mm mini jack - 1 stereo headphone output on 3.5 mm mini jack - 1 USB-C port (USB 2.0) - Micro SD card slot - Clock generator (TCXO – voltage-compensated crystal oscillator) temperature) - Mini Jack output with adjustable level reduction - Switchable high-pass filter, compressor, limiter and noise gate - Adjustable input delay to compensate for delay differences between microphones (0 to 300 ms) - Integrated 2x2 USB audio interface (supports 32-bit floating point resolution) - Additional mini Jack input for audio from a camera, wireless microphone receiver or small microphone (2.5 V or 5 V supply voltage selectable) - 2" LCD colour display - 24 V or 48 V phantom power - Recording media: micro SD cards (64 MB - 2 GB), micro SDHC (4 - 32 GB) and micro SDXC (up to 512 GB) - With transport and volume buttons - Long-term recording with 3 AA batteries - Power supply possible via USB-C port - Compact, lightweight and robust fibreglass housing for use with cameras - Dimensions: 99 x 80 x 40 mm - Weight: 195 g
en 
