Essential Information About the Two notes Torpedo Reload II
- 100 percent analog reactive load box with Celestion-approved load response to preserve your amp's behavior.
- Compatible up to 200 W RMS (tube and solid-state amps) with selectable impedance of 4, 8, or 16 ohms.
- Dual channel with source selection per channel (1 amp input and 2 line inputs) and continuous active attenuation from complete silence to stage-ready level.
- Built-in power amplifier (up to 215 W RMS per channel at 4 ohms), XLR line outputs, and stereo effects loop for a comprehensive studio and live rig.
Reload II: The Modern Evolution of the Two notes Load Box
The Torpedo Reload II continues the legacy of Two notes solutions dedicated to volume control, silent recording, and re-amping, with a clear goal: to keep your amp's tone and feel intact even when you need to play at low volume. This second generation takes the concept further with a new optimized reactive load (Celestion-approved), a more flexible dual channel architecture, and truly continuous attenuation that doesn't lock you into fixed steps.
Result: you can run your amp head "at the sweet spot," capture a clean direct signal, or drive one or two cabinets with comfortable power, while centralizing gain, volume, and routing in a single device.
Who and In What Contexts to Use the Reload II
The Reload II is aimed at guitarists (and bassists) who love the character of a real amp but want to control volume without sacrificing dynamics. It suits both seasoned musicians and professionals seeking a reliable backline: low-volume rehearsals, venues with sound restrictions, home studios, silent recording, re-amping, or stereo setups.
In practice, it quickly becomes a "center of gravity" for pedalboards or racks: you place your modulation, delay, and reverb effects in the stereo loop, send an XLR output to your audio interface or mixer, and keep one (or two) cabinets on stage for physical feel and air movement.
Controls, Routing, and Key Features
The heart of the Reload II is the combination of a reactive load box and a transparent power amplifier enabling smooth active attenuation from silent mode (load box) to amplification capable of driving a cabinet live. Each channel features a source selection (AMP or LINE), speaker output level control, and line output level for precise gain staging adapted to the context (studio, stage, re-amping).
To quickly shape the feel, Two notes includes Depth and Presence controls per channel (body and definition), plus a MOJO control designed to restore a "power" sensation and livelier response even at low volume. For effects integration, the stereo effects loop is footswitch-activated and offers series or parallel routing, Dry/Wet adjustment, dual mono operation, and an A-to-B link mode, with a send level selector to accommodate both pedals and studio processors.
Finally, the GENOME Reload II Edition software ecosystem and the DynIR Series-R virtual cabinet collection (24 speakers) complete the package for consistent direct recording, as well as advanced capture and profiling uses via CODEx, depending on your workflow.
Sound
The Reload II follows a simple philosophy: not to "recolor" your amp but to preserve its identity, natural compression, and pick response. The Celestion-approved reactive load helps maintain a tight low end, credible highs, and especially an interaction close to a real cabinet, which is crucial when pushing a tube amp. Depth and Presence controls allow quick adjustment of the feel (more massive or more cutting) without resorting to the amp's EQ, while MOJO helps regain a pleasant "bounce" and density at low levels.
Artist-wise, the Reload philosophy is found in rigs oriented toward performance and studio use, with the Reload II notably seen with Andy Wood, appreciated for stereo configurations and backline control.
Technical Specifications
Load Box and Attenuation
- Type: 100 percent analog reactive load box, Celestion-approved load response
- Amp compatibility: tube and solid-state amps up to 200 W RMS
- Maximum admissible power (peak): 250 W peak (with adequate ventilation)
- Selectable load impedances: 4, 8, 16 ohms
- Attenuation/amplification: continuous attenuation (down to silence) to continuous amplification (up to +20 dB)
- Safety load: 270 ohms / 20 W
Power Amplifier and Speaker Outputs
- Operation: stereo / dual mono
- Max power (single channel used, THD+N under 1%): 1 x 215 W RMS at 4 ohms, 1 x 120 W RMS at 8 ohms, 1 x 50 W RMS at 16 ohms
- Max power (both channels used, THD+N under 1%): 2 x 150 W RMS at 4 ohms, 2 x 120 W RMS at 8 ohms, 2 x 50 W RMS at 16 ohms
- Minimum speaker-side impedance: 3.5 ohms
- Speaker outputs: 2 independent CAB OUT outputs
Dual Channel, Inputs, Outputs, and Effects Loop
- Architecture: dual channel (Channel A and Channel B) with source selection per channel
- Amp input: 1 AMP IN input, impedance selectable via AMP IMPEDANCE switch
- Line inputs: 2 LINE IN inputs (A and B)
- Line outputs: 2 symmetric LINE OUT XLR outputs with level control per channel
- Stereo effects loop: footswitch-activated, series or parallel routing
- Dry/Wet adjustment on return
- Return modes: dual mono and A-to-B link
- FX send level selector: -10 dBV or +4 dBu
Controls and Sound Shaping Functions
- AMP IN LEVEL control with status indicators to optimize amp input level
- Per channel controls: CAB volume, LINE OUT level
- Per channel controls: Depth (low boost) and Presence (high boost)
- MOJO control per channel for power feel at low volume
- Clipping indicators and thermal protections
Format, Integration, and Construction
- Format: top-box or 2U rackmount (brackets included)
- Side panels made of genuine wood
- Cooling: passive (heatsinks) and active (two-speed fan)
- Dimensions (W x H x D): 365 mm x 89 mm x 220 mm (240 mm with connectors and knobs)
- Weight: 6.9 kg
- Warranty: extended to 3 years after product registration
Software and Included Content
- GENOME Reload II Edition: lifetime license included
- DynIR Series-R: 24 premium virtual DynIR cabinets (Celestion and Two notes)
- CODEx: AI profile player integrated into GENOME
- Announced compatibility: Neural Amp Modeller (NAM), AIDA-X, and Proteus
Included Accessories
- Reload II unit (with protective sleeve)
- Power cord
- Quick start guide
- Removable rack ears for 2U mounting
- GENOME Reload II Edition license (download) and DynIR Series-R collection
Power Consumption
- Power supply type: mains via IEC60320 C14 connector
- Input voltage: 100 V to 230 V, 50 to 60 Hz
- Maximum power: 100 W
- Maximum current (approx.): 1000 mA at 100 V, 435 mA at 230 V
en 
