3x gratis a partir de 69 euros o financiar hasta 4x
2 millones de artículos
en stock
3 años de garantía
Entrega gratuita
a partir de 199€ de compra
30 días de garantía
de devolución del dinero
Te notificaremos la llegada de la próxima remesa si te registras aquí
Descripción
The ENGL Custom Footswitch Z-5 is designed for ENGL amps that are equipped with the 9-pin Custom Footswitch Port. It enables you to select four channels directly by combining the Clean/Lead channel switching and Gain Lo/Hi switching. Furthermore you can remote control two other functions (e.g. Reverb and V.L.S. at the "Screamer 50" models or Contour and Master A/B at the "Ritchie Blackmore Signature" amp). Power is supplied to the footswitch via the special connector cable. Contents: 1. ENGL Custom Footswitch Z-5; 2. One connector cable 7 m in length (Sub D, 9-Pin male/female connector, 1:1 ); a 10m cable is optionally available 3. Operating Instructions Cable connections: 1.Make sure the amplifier is OFF before you connect the cable. 2.Plug the connector cable to both the footswitch and amp. Fasten the screws on the mounting brackets. Always check the screws to ensure the plugs are inserted and fastened properly! 3.The cable should never be bent at a severe angle near the two plugs, nor should the connectors/ports be subjected to tensile force. In other words, don't jerk or force the plugs or cable. CAUTION! Never connect either of the two ports at the amp or footswitch to an external device such as a computer or printer, etc. If you do, you may damage the device and possibly the amp and footswitch.