Essential Information About the DJ Mixer DJM-V5
- Compact format inspired by the DJM-V10, featuring 60 mm long-throw faders for ultra-precise level control
- 4-band EQ, compressor per channel, 3-mode filters (low-pass, high-pass, cross-pass), and dedicated Send FX
- High-resolution audio thanks to the 96 kHz / 64-bit DSP and 32-bit ESS converters on inputs/outputs
- Extensive connectivity USB-C (rekordbox, Serato DJ Pro), MULTI I/O, USB send/return, and integrated SonicLink
The Heritage of a Club Standard
Direct heir to the ergonomics and "feel" of the DJM-V10, the DJM-V5 condenses this philosophy of broad, musical mixing into a chassis approximately 30% more compact. It features an architecture designed to layer multiple sources without distortion, with a clean stereo image and comfortable headroom, tailored for clubs, studios, stages, or fixed installations.
Who Is the DJM-V5 For?
Ideal for club DJs, hybrid performers, live beatmakers, and content creators, the DJM-V5 excels in layered sets: solid kick, stems, drum machines, and external effects. The 60 mm faders enable precise fades, while the 3-position filters and per-channel effects send offer immediate expression, whether solo, back-to-back, or in live setups.
Features and Innovations
Each channel benefits from a dedicated filter with three selectable types (low-pass, high-pass, cross-pass) and a travel designed for subtle or sharp sweeps. The
Send FX section offers six musical effects - "Short Delay," "Reverb," "Shimmer," "Tape Echo," "PingPong," "Echo-Verb" - controlled via a send potentiometer per channel. The 96 kHz / 64-bit engine, combined with 32-bit ESS converters, ensures precise imaging and minimal background noise. On the connectivity side, dual USB-C ports (rear and top panel) simplify use with
rekordbox,
Serato DJ Pro (license required), and DJM-REC on iPhone/iPad USB-C, while USB send/return and MULTI I/O facilitate integration of external processors. The integrated
SonicLink enables direct pairing with compatible headphones (HDJ-F10 and models expected in 2026) for cable-free monitoring, ready for the modern booth.
Technical Specifications
Software
- Compatibility: rekordbox for Mac/Windows
- Compatibility: Serato DJ Pro (license required)
Audio Performance
- Frequency response: 20 Hz - 40 kHz (LINE)
- Signal-to-noise ratio: 110 dB (USB), 105 dB (LINE), 88 dB (PHONO), 79 dB (MIC)
- Total harmonic distortion: 0.005% (LINE - MASTER)
- Processing: 96 kHz / 64-bit DSP, 32-bit ESS A/D and D/A converters
Inputs
- LINE x 3 (RCA)
- PHONO x 3 (RCA)
- RETURN x 1 (6.35 mm TS jack)
- MIC x 1 (XLR and 6.35 mm TRS jack)
Outputs
- MASTER x 1 (XLR)
- BOOTH x 1 (6.35 mm TRS jack)
- SEND x 1 (6.35 mm TS jack)
- HEADPHONE MONITOR x 2 (6.35 mm stereo jack x 1, 3.5 mm stereo mini-jack x 1)
- REC x 1 (RCA)
USB and Networking
- USB Type-C x 2 (rear and top panel, MULTI I/O)
- LINK (LAN) x 1
- USB send/return for external processors
SonicLink (Headphones)
- Frequency band used: 2.4 GHz
- Direct pairing: dedicated button (HDJ-F10 and models planned for 2026)
Power Supply and Dimensions
- Dimensions (W x D x H): 302.0 x 437.5 x 107.9 mm
- Weight: 8.0 kg
Included Accessories
- Power cord
- Quick start guide
- Safety instructions
- Warranty (region-dependent)
* Some features require specific conditions: license for Serato DJ Pro; DJM-REC and iPhone/iPad pairing only on models with USB-C port. Specifications subject to change.
en 
