Essential Information About the Prodipe B210 DSP Solo UHF Headset Microphone
- "Digital Signal Processor" treatment for UHF sound close to a wired system
- Lightweight and adjustable cardioid headset microphone, optimized for singing and spoken voice
- Up to 100 frequencies with infrared synchronization and automatic tuning
- Up to 8 B210 DSP systems usable simultaneously on the same stage
In the Line of the Prodipe B210 DSP Range
The B210 DSP Solo is part of Prodipe's UHF range dedicated to demanding stage uses. Its digital processing refines reproduction and dynamics to offer a definition close to a wired microphone while maintaining the freedom of movement of a wireless system.
For Whom and For What Uses?
Designed for singers, hosts, fitness instructors, speakers, and performing artists, this headset microphone ensures precise voice capture with excellent rejection of ambient noise. Its lightness and adjustable frame adapt to your morphology for long performances without discomfort.
DSP Technology and Stage Ergonomics
The DSP audio processing circuit optimizes clarity, dynamics (> 90 dB), and linearity of response for intelligible diction and a natural timbre. Coupled with wide UHF transmission (630 to 680 MHz), it guarantees a stable connection and comfortable range up to 60 m.
Infrared synchronization facilitates setup: scan and automatically lock one of the 100 available frequencies, avoid interference, and deploy up to 8 B210 DSP systems in parallel. The practical connectivity (mini XLR on bodypack, balanced XLR and unbalanced 6.35 mm Jack outputs on the receiver) easily integrates into any audio setup.
Technical Specifications
General
Headset Microphone
- Type: Electret condenser
- Polar pattern: Cardioid
- Sensitivity: -45 dB +/- 3 dB (0 dB = 1 V/Pa at 1 kHz)
- Frequency response: 100 Hz - 12.5 kHz
- Output impedance: 2.2 kOhms (at 1 kHz)
- Cable length: 1 m
System - Main Functions
- Transmission type: UHF
- Bandwidth: 630 - 680 MHz
- Number of frequencies: 100
- Infrared synchronization: automatic search and tuning
- Dynamic range: > 90 dB
- Harmonic distortion: < 0.1%
- Frequency response: 30 Hz - 20 kHz
- Range: 60 m
- Simultaneous use: up to 8 B210 DSP systems
System - Transmitter (Bodypack)
- Transmission power: 10 mW
- Modulation type: FM
- Power supply: LR6 (AA) 1.5 V x2 (approximately 8 hours)
- Microphone connector: mini XLR on UHF B210 DSP bodypack
System - Receiver
- Power supply: AC 100 - 240 V (50 - 60 Hz)
- Voltage: not specified
- Signal-to-noise ratio: > 96 dB
- RX sensitivity: < -94 dBm
- Unbalanced audio output: 6.35 mm Jack
- Balanced audio output: XLR
en 
