Advice : +33 257 880 074
en 
The ART 910-A has té extensively researched to provide exceptional audio performance and great versatility for intensive audio applications. It combines a motor with 1.75" compression, a 10" bass driver, an amplifier two 2100 W channels and a 2100 W waveguide; directivity constant True Resistive Waveguide ensuring consistent coverage of 100° x 60° for distortion-free sound, reaching 130 dB SPL. Thanks to FiRPHASE and Bass Motion Control (BMC) DSP processing, exclusive to RCF, the behavior of the speakers is optimized. accurately on each model, for clarity. absolute and deep and powerful bass on the side. audience. The elegantly designed box uses a specific polypropylene composite with internal M-brace reinforcement. Easy to use transport, it attaches to a pole, a wall, a structure or hangs thanks to the numerous points provided at the same time. this effect.
Power in motion
The most powerful amplifier in its category. RCF's improvements to its speakers make them more solid and powerful, the amplifier naturally accompanies this evolution. With 2100 W, the Class D amplifier The 2-channel ART 9 is 50% more powerful than previous models, capable of handling extreme sound pressure levels with ultra-fast attack, high-speed transient response realistic and very low heating. Thanks to its effectiveness Energy efficient, the NX 9 Series does not need ventilation. The amplifier is plated &àgrave; an all-aluminum heat exchanger the back of the box, without any moving parts. Being structurally fixed to the internal frame, the amplifier is firmly and securely held in the cabinet. The new input circuit ensures low distortion, and an advanced limiter. preserves the naturalness of the input signal, whatever its level. All ART 9 Series amplifiers are designed to EN62368-1 for safety. maximum, and their food at agrave; cutting combines efficiency high and minimum weight.
New m-bracing cabinet design
The professional look of the ART 9 Series cabinet is ideal for beginners. live events or fixed installation applications. The elegantly designed box uses a specific polypropylene composite, combined with &àgrave; a radically new construction concept. The protective grille, made of robust steel, protects the speakers and bass-reflex vents. The specially designed M-brace reinforcement connects the four interior sides of the cabinet with the amplifier, preventing any deformation. We thus obtain a completely inert volume, with increased acoustic damping even at high altitudes. maximum volume. It also provides greater resistance to external mechanical stresses.
Bass Motion Control
In order to extend the bass response and improve performance, RCF engineers found a solution to improve bass response. the way to remove the high-pass filter, replacing it with an innovative approach. Introducing BMC (Bass Motion Control), a new advanced bass processing. management of the bass speaker excursion. The speaker equipped with BMC processing can handle the lowest audible frequencies without affecting the stability of the speaker. of the bass speaker, with linearity extended and more faithful rendering.
The BMC processing approach is based on the complete mapping of the dynamic behavior of the bass driver , in order to generate a specific algorithm limiting only excessive excursions. It therefore leaves freedom total reproduction of the signal to the loudspeaker. Normally used low-cut filters reduce the amount of travel that can damage the bass driver, but they also change the phase response. The new BMC processing allows you to overcome this rule.
New electroacoustic paradigms
The innovative design of the ART 9 Series resides in the speaker cabinet. The new True Resistive Waveguide is the result of several refinements made to the technology. the design of the speakers but also the bass-reflex vents at the same time. using finite element analysis and numerous measurements in RCF's anechoic chambers. Thanks to FiRPHASE technology, the new form and Depending on the location of the ports, the speaker now acts as an ideal point source for a perfect sound image. Acoustically, the TRW waveguide emulates a pure, resonance-free resistive load, reducing the high-frequency distortion of a conventional horn. With its asymmetrical design, the opening angle of the waveguide provides directivity. constant performance across the entire listening area and an improved stereo image.
D’ exception
Light and powerful, RCF speakers set the benchmark in terms of high performance. All speakers are designed in Italy by RCF engineers for reliability. maximum and perfect agreement between them.
Treble: The 1.75" voice coil attached to the polyimide dome -Kapton, is a new design. It uses unique bonding and reinforcing rib technology, making it 10 times more rigid than previous models, for precision and longevity. The redesigned phase section increases the clarity of the sound and improves the response on transients and the coupling with the bass driver.
Bass: The bass driver design provides greater stability at higher currents, with less distortion and better heat management. RCF's quality control is particularly strict. Our bass loudspeakers are tested with a continuous signal for 200 hours, in order to demand them at high levels. extreme levels. Only the best bass loudspeakers are suitable for this purpose. the ART 9 Series.
New perspective on linearity
RCF loudspeakers are designed using patented, advanced FiR filtering technology, developed to deliver high performance. The listener receives transparent sound, absolute precision and impeccable stereo images.
The special FiRPHASE filters achieve a consistent distribution of sound for all listeners without phase distortion, ensuring minimal latencies to the system.
ACOUSTIC SPECIFICATIONS
SPEAKERS
INPUT/OUTPUT SECTIONS
PROCESSOR SECTION
POWER SECTION
COMPLIANCE STANDARD
PHYSICAL SPECIFICATIONS< /p>
SIZE
