Advice : +33 257 880 074
en 
Pure, honest sound - 1-inch dual-diaphragm capsule
Whether you’re recording in a large concert hall or a one-room studio, you want to capture the emotion and moment, not just the sound. With a full frequency range of 20Hz – 20kHz and the lowest self-noise in its class, the C314 brings out the best in every nuance. Built on the rich heritage of the C414 XLS capsule, its dual computer-matched diaphragms guarantee the highest polar pattern accuracy, while the integrated suspension dramatically reduces noise for pure, faithful recordings.
Tuned to capture every nuance - four selectable polar patterns
The versatile C314 is the multi-instrumentalist in your microphone rig, ready to fill in wherever needed. Whether it’s cardioid, supercardioid, omni or figure-8 polar patterns, there are plenty of ways to get the most natural sound from any instrument—electric and acoustic guitars, drums, and much more. Employ a supercardioid pattern to reduce drum spill, then quickly switch to a figure-8 pattern to balance out two vocalists. These easy-to-access options make the AKG C314 a great addition to any studio with limited space.
Never get overloaded - overload detection LED and bass-cut filter
With a variety of thoughtful extras, the AKG C314 empowers you to make better recordings, hands down. When acting as both artist and engineer, its overload detection LED makes it easy to see when your input levels are too high. This helps you take full advantage of the mic’s huge dynamic range, and only engage the pad when necessary. Its bass-cut filter, too, helps you curb rumbles, vibrations and loud, boomy sounds, and minimizes the proximity effect for balanced recordings.
Features:
- 1 "double membrane evaporated gold capsule based on C414
- Directivities: cardioid, omnidirectional, supercardioid and figure 8
- Frequency response: 20 - 20,000 Hz
- Max SPL: 135/155 dB
- Equivalent noise level: 8 dB
- Sensitivity (cardioid): 20 mV / Pa (-34 dBV)
- -20 dB attenuator pad
- Phantom power + 48V required (± 4V)
- 3-pin XLR connector
- Included: H85 elastic suspension, metal case, SA60 microphone stand adapter and W214 windscreen
- Dimensions: 160 x 55 x 43 mm
- Weight: 300 g
