Consiglio : +33 257 880 074
it 
A legendary amp, on your pedal board
The Warm Audio Warmdrive is a true reproduction of the most sought after "amp-in-a-box" pedal of all time, delivering the tones of a truly unattainable overdriven amp. Guitar heroes and modern virtuosos like SRV, Eric Clapton, Robben Ford, John Mayer, Santana and Cory Wong are known to have used either the original amplifier or the pedal inspired by it. With a roster of artists like this, it's no wonder original vintage pedals are some of the toughest and most demanding tone hunters out there. True to the heritage, the Warmdrive delivers all the tones of the original pedal and amplifier that inspired it.
True to heritage, true to sound
Whether you're driving breaking cleans, thickening up rhythm tones, or overdriving solos, the Warmdrive can transform your amp from a polished, clean pedal rig into a fuzzy monster. While the Warmdrive has plenty of dynamic gain on tap, adding the pedal to your rig doesn't significantly alter or lower your tone. Just like the original, the Warmdrive features the unique Voice/Tone control to transition from silky tones reminiscent of that special overdrive amp at the sweet spot to sustain-rich distortion. It's like having the best of both worlds, from clean to medium.
Pedal settings and controls
The voice/tone control combination on the pedal gives performers additional versatility over the typical overdrive pedal, allowing the player to alter the frequency both before (voice control) and after (tone control) the steps of clipping. Playing with the knobs can create dynamic sounds that almost sound like two guitar signals at the same time. Warmdrive will also push beyond light overdrive, to an overdriven cascading gain tone that makes it easy to get lost in a solo jam. Pair these controls with critical volume and gain knobs and the Warmdrive is a venerable addition to any live or studio rig.
Features:
- Overdrive pedal for electric guitar
- Faithful replica of a well-known Amp-in-a-box pedal that reproduces the sound of an expensive and coveted D-style tube amplifier
- Controls: Gain, Volume, Tone, Voice
- Status LED: Effect On
- Footswitch: Effect Bypass
- Input/output on 6.3 mm jack
- Connection for mains power on cylindrical socket 2.1 x 5.5 mm, negative polarity inside
- Works with a 9V battery
- Optional suitable 9 V DC power supply unit not included (Item No. 409939)
- Current consumption: 25mA
- Dimensions (W x D x H): 64 x 120 x 57 mm
- Weight: 340g
