Essential Information About the UHF Prodipe B210 Solo DSP Headset Microphone System
- DSP processing for a sound reproduction close to a wired microphone, even in UHF.
- Cardioid electret capsule headset microphone, comfortable and lightweight, designed for singing and voice.
- 100 frequencies with infrared pairing and simultaneous use of up to 8 systems.
- Balanced XLR and unbalanced 6.35 mm Jack outputs, range up to 60 m.
In the lineage of the B210 series: wireless freedom, wired precision
Designed as a continuation of Prodipe's B210 range, the B210 "Solo" integrates a Digital Signal Processor that refines the dynamics and definition of the signal. The result: a more precise and natural sound experience usually associated with wired systems, while maintaining the mobility of a reliable UHF system.
A stage partner for singers, speakers, and coaches
Ideal for singers, lecturers, fitness instructors, or actors, this wireless system ensures an intelligible and stable voice when moving freely. The cardioid directivity helps contain ambient noise, while the UHF 528-578 MHz band offers flexible operation depending on the environment.
Key Features of the B210 Solo DSP
DSP and cardioid capsule
The DSP circuit optimizes clarity and transients for a more defined voice. The cardioid electret capsule favors the source while limiting feedback and stage pickups.
Quick start
Automatic infrared search and tuning simplify pairing on one of the 100 available frequencies. Up to 8 systems can operate simultaneously for multi-speaker events.
Connectivity and integration
The UHF B210 DSP bodypack adopts a convenient mini XLR connector. On the receiver, you can choose between a balanced XLR output for long cable runs and an unbalanced 6.35 mm Jack output for direct connections.
Stage reliability
With a stated range of 60 m, FM modulation, dynamic range >90 dB, and signal-to-noise ratio >96 dB, the system aims for clean and consistent transmission for your performances.
Technical Specifications
General
Headset Microphone
- Type: electret condenser
- Directivity: cardioid
- Sensitivity: -45 dB +/-3 dB (0 dB = 1 V/Pa at 1 kHz)
- Frequency response: 100 Hz - 12.5 kHz
- Output impedance: 2.2 kOhms (at 1 kHz)
- Cable length: 1 m
System - Main Functions
- Transmission type: UHF
- Band: 528 - 578 MHz
- Number of frequencies: 100
- Dynamic range: >90 dB
- Harmonic distortion: <0.1%
- Frequency response: 30 Hz - 20 kHz
- Range: 60 m
System - Transmitter (Bodypack)
- Transmission power: 10 mW
- Modulation type: FM
- Power supply: LR6 (AA) 1.5 V x2 (approx. 8 h)
- Microphone connector: mini XLR (on UHF B210 DSP bodypack)
System - Receiver
- Power supply: AC 100-240 V (50-60 Hz)
- Voltage: not specified
- Signal-to-noise ratio: >96 dB
- RX sensitivity: < -94 dBm
- Unbalanced audio output: 6.35 mm Jack
- Balanced audio output: XLR
en 
Verified
